Call +86 151 8448 3461sales@huirui-laser.com

Metal powder types table

August 5, 2023

Arthur Shaw

Nickel-based alloy powder

Nickel-based alloy powder has excellent corrosion resistance and oxidation resistance, and has excellent resistance to low-stress abrasive wear and adhesive wear below 600°C.

Iron-based alloy powder

Iron-based alloy powders are usually used in mechanical parts that are resistant to wear and weak acid corrosion media below 500°C.

Copper base alloy powder

Copper-based alloy powder has excellent thermal conductivity, strong electrical conductivity, strong corrosion resistance, and is easy to process.

Cobalt-based alloy powder

Cobalt-based alloy powder can still maintain excellent strength and hardness at a high temperature of 900°C, and also has excellent comprehensive properties such as resistance to high-temperature wear, high-temperature oxidation and thermal fatigue.

Customized alloy powder

According to the different needs of customers in various industries, we can tailor special alloy powders for customers.

Special alloy powder

Special alloy powders mainly include: laser cladding alloy powder, centrifugal casting alloy powder, injection molding alloy powder, soft magnetic alloy powder and 3D printing powder.

 

Powder subdivision types:

Nickel-based supersonic spray powder, nickel-based flame spray welding powder, nickel-based plasma cladding powder, nickel-based flame spray powder, nickel-based high-temperature alloy powder, nickel-based special composite powder, iron-based supersonic spray powder, iron-based plasma cladding powder, iron-based flame spray powder, iron-based flame spray welding powder, iron-based high-temperature alloy powder, iron-based special composite powder, cobalt-based plasma cladding powder, cobalt-based supersonic spray powder, cobalt-based flame spray welding powder, cobalt-based flame spray powder, cobalt-based high-temperature alloy powder, cobalt-based special composite powder, copper-based tin bronze powder, copper-based aluminum bronze powder, copper-based aluminum Nickel bronze powder, cobalt-based laser cladding powder, nickel-based laser cladding powder, iron-based laser cladding powder, cobalt-based centrifugal casting powder, nickel-based centrifugal casting powder, iron-based centrifugal casting powder, FeSi soft magnetic powder, FeNiMo soft magnetic powder, FeSiCr soft magnetic powder, special cobalt-based composite powder, special nickel-based composite powder, special iron-based composite powder, special customized Ni625, special customized composite powder, special customized C276, cobalt-based PM powder, nickel-based PM powder, iron-based PM powder, special customized MIM powder, iron-based MIM powder, cobalt-based MIM powder.

 Nickel base powder
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Co Mn B Ni Cu Others
Ni15AA 15 0.03 0.46 2.30 ≤0.50 0.09 0.90 Bal 20.0 180/500 WC series spray welding layer base
Ni20M 20 0.03 4.50 2.00 0.70 Bal 180/500 Glass molds, various molding molds, etc.
Ni20PTA 20 0.05 1.00 ≤0.15 0.90 Bal 80/230 Glass molds, various molding molds, etc.
Ni22AA 22 0.20 0.10 2.85 ≤0.50 0.50 1.45 Bal 180/500 Glass molds, various molding molds, etc.
Ni22APTA 28 ≤0.05 4.50 3.80 ≤3.00 0.30 1.00 Bal 100/270 Glass molds, various molding molds, etc.
Ni22M1 26 0.03 0.50 3.00 ≤0.50 0.50 1.00 Bal ≤5.00 180/500 Glass molds, various molding molds, etc.
Ni25 25 0.20 3.50 ≤8.00 1.50 Bal 180/500 Glass molds, various molding molds, etc.
Ni28M 28 0.05 0.10 2.80 1.00 Bal 180/500 Glass molds, various molding molds, etc.
Ni30AA 30 0.15 2.50 2.60 ≤1.00 0.30 1.40 Bal 180/500 Pulleys, gear teeth
NJ30-HY 30 0.03 4.00 2.40 ≤0.50 1.00 Bal 180/500 Glass molds, various molding molds, etc.
NJ30-PTA 30 0.40 5.50 4.00 ≤1.50 1.00 Bal 180/500 Glass molds, various molding molds, etc.
Ni31M 31 ≤0.05 4.00 2.40 ≤3.00 0.90 Bal ≤5.00 180/500 Glass molds, various molding molds, etc.
Ni31M1 32 ≤0.05 3.50 3.20 ≤3.00 0.30 0.90 Bal ≤5.00 180/500 Glass molds, various molding molds, etc.
Ni35AA 35 0.20 8.00 3.20 ≤3.00 0.10 0.10 1.60 Bal 150/300 Glass mold, valve seat
Ni35 35 0.30 10.50 3.50 ≤10.0 2.00 Bal 150/300 Glass molds, various molding molds, etc.
Ni36M 36 ≤0.05 4.00 2.50 ≤3.00 ≤0.50 1.10 Bal ≤5.00 180/500 Glass molds, various molding molds, etc.
Ni37M 35 0.15 4.50 2.80 ≤0.50 1.00 Bal ≤5.00 180/500 Glass molds, punches, various initial films
Ni40AA 40 0.30 7.50 3.50 ≤2.30 0.10 0.10 1.70 Bal 150/300 Screw feeder, mold core
Ni45A 45 0.05 8.00 3.50 ≤10.0 2.00 Bal 150/300 Screw feeder, mold core
Ni45AACuMo 50 0.35 13.0 3.50 ≤5.00 2.50 2.50 Bal 2.50 150/300 Screw feeder, mold core
Ni45PTA 46 0.05 7.50 3.80 ≤5.00 2.00 Bal 150/300 Punches, Valves, Plunger
Ni46M 46 0.05 6.54 2.80 ≤1.00 0.35 1.00 Bal ≤5.00 180/500 Glass molds, various molding molds, etc.
Ni50AA 50 0.45 11.0 4.00 ≤5.00 1.00 0.30 2.20 Bal 150/300 Punches, Valves, Plunger
Ni50CuMoW 51 0.30 11.0 4.00 ≤5.00 3.00 Bal 0.50 W:1.50 300/500 Punches, Valves, Plunger
Ni55AA 56 0.50 15.0 4.00 ≤5.00 3.00 Bal 100/270 Grinding tools, cams, plungers and exhaust valves
Ni55AA 55 0.50 15.0 4.00 ≤8.00 3.00 Bal 150/300 Grinding tools, cams, plungers and exhaust valves
Ni55CuMo 53 0.40 15.0 4.30 ≤12.0 2.50 3.10 Bal 2.50 150/300 Grinding tools, cams, plungers and exhaust valves
Ni55AACuMo 50 0.60 15.0 4.00 ≤5.00 2.00 3.00 Bal 2.00 100/270 Grinding tools, cams, plungers and exhaust valves
Ni55AAPTA 58 0.80 15.0 4.00 ≤5.00 ≤0.20 3.00 Bal 100/270 Grinding tools, cams, plungers and exhaust valves
Ni56AA 56 0.60 13.5 3.80 ≤5.00 ≤0.50 2.60 Bal 100/270 Valves, molds, screws
Ni56PAT 56 0.90 18.0 5.30 ≤5.50 1.90 Bal 100/270 Valves, molds, screws
Ni58A 58 0.60 14.0 4.20 ≤10.0 1.70 3.40 Bal 1.80 150/300 Plunger, valve, pump blade, screw, etc.
Ni58AMO 58 0.50 15.0 4.00 ≤10.0 2.00 3.50 Bal 1.50 150/300 Plunger, valve, pump blade, screw, etc.
Ni60AA 60 0.78 15.9 4.55 ≤5.00 3.00 Bal 150/300 Plunger, valve, pump blade, screw, etc.
Ni6OAAX 60 0.70 15.8 4.30 ≤8.00 ≤0.10 3.20 Bal 150/300 Plunger, valve, pump blade, screw, etc.
Ni60A 60 0.70 15.0 4.00 ≤8.00 ≤0.10 3.20 Bal 150/300 Plunger, valve, pump blade, screw, etc.
Ni60 60 0.80 16.0 4.00 ≤15.0 3.20 Bal 150/300 Plunger, valve, pump blade, screw, etc.
Ni60PTA 60 1.10 19.0 5.50 ≤5.00 2.80 Bal 100/270 Plunger, valve, pump blade, screw, etc.
Ni60AAPTA-1 60 1.00 19.0 5.50 ≤8.00 2.80 Bal 100/270 Plunger, valve, pump blade, screw, etc.
Ni60AAPTA-2 60 1.00 19.0 5.50 ≤15.0 2.80 Bal 100/270 Plunger, valve, pump blade, screw, etc.
Ni60AAPTA-3 60 0.80 15.5 4.50 ≤15.0 ≤0.30 3.10 Bal 100/270 Plunger, valve, pump blade, screw, etc.
Ni60GM 60 1.00 14.0 3.50 ≤15.0 0.80 3.00 Bal 20/300 Plunger, valve, pump blade, screw, etc.
Ni60H 61 0.95 15.0 4.10 ≤15.0 3.10 Bal 150/300 Plunger, valve, pump blade, screw, etc.
Ni6OL 56 0.50 14.6 3.75 ≤15.0 0.50 ≤0.50 2.70 Bal 150/300 Laminar flow roller, etc.
Ni6OM 63 0.80 16.5 4.30 ≤15.0 ≤0.30 3.00 Bal 150/300 Screw, etc.
Ni6OW 62 0.80 16.0 3.90 ≤15.0 3.40 Bal W:5.00 150/300 Screw, etc.
Ni60S 60 0.80 15.5 3.80 ≤15.0 0.10 0.20 3.40 Bal 150/400 Screw, etc.
ND500 52 1.20 20.5 2.90 ≤3.00 5.50 13.00 2.30 Bal 100/270 Used for extruder and screw PTA surfacing
NF600 60 0.50 16.0 3.50 ≤5.00 3.00 Bal 150/300 Used for extruder and screw PTA surfacing
NF600W 60 0.70 15.0 2.50 ≤5.00 3.00 Bal W:4.30 150/300 Used for extruder and screw PTA surfacing
NF601 60 0.70 15.5 3.20 ≤5.00 2.50 3.00 4.00 Bal 150/400 Used for extruder and screw PTA surfacing
Ni60B 60 0.60 17.1 3.10 ≤25.0 0.46 4.00 Bal 150/300 Glass molds, various initial films
Ni60AACuMo 58 0.50 15.5 4.00 ≤3.00 2.50 3.50 Bal 2.50 150/300 Glass molds, various initial films
Ni60AACuMo1 60 0.70 15.0 4.00 ≤5.00 3.00 3.20 Bal 2.50 150/300 Glass molds, various initial films
Ni60AACuMo2 60 0.80 16.0 4.10 ≤5.00 1.00 3.20 Bal 1.50 150/300 Glass molds, various initial films
Ni60AACuMo3 57 0.60 16.5 4.00 ≤5.00 2.00 3.00 Bal 2.00 150/300 Glass molds, various initial films
Ni60ACuMo 60 0.80 15.5 4.00 ≤15.0 1.00 3.50 Bal 1.00 150/300 Glass molds, various initial films
Ni60W3 62 0.80 16.0 4.00 ≤15.0 3.30 Bal W:3.50 150/300 柱塞、泵叶等
Plunger, pump blade, etc.
Ni60CuMoW 60 0.60 16.0 4.00 ≤4.00 2.00 4.00 Bal 2.00 W:2.50 300/500 Plunger, pump blade, hard seal ball valve, etc.
Ni220 31 <0.15 <5.00 <3.00 <2.00 1.10 Bal ≤2.00 100/270 Glass molds, various initial films
Ni220M 26 ≤0.05 4.50 3.20 ≤3.00 0.30 1.00 Bal ≤2.00 100/270 Glass molds, various initial films
Ni330 37 0.10 5.00 3.50 ≤6.00 0.20 1.20 Bal 2.50 ≤5.00 100/270 Glass molds, various initial films
BNi11 0.02 25.6 4.70 ≤20.0 Bal ≤10.0 -300
BNi11M 0.03 10.0 5.00 ≤18.0 Bal ≤10.0 -300
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Nickel based mixed tungsten carbide powder
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
Ni15WC ≥60 85%Ni60+15%WC 150/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni20WC ≥60 80%Ni60+20%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni25WC ≥60 75%Ni60+25%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni30WC ≥60 70%Ni60+30%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni35WC ≥60 65%Ni60+35%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni40WC ≥60 60%Ni60+40%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni45WC ≥60 55%Ni60+45%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni50WC ≥60 50%Ni60+50%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni55WC ≥60 45%Ni60+55%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni60WC ≥60 40%Ni60+60%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Ni65WC ≥60 35%Ni60+65%WC 150/400 80/400 Wire drawing wheels, fan blades, screw input devices, etc.
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
 Nickel based coated tungsten carbide powder
Grade Hardness-HRC Chemical Composition Particle Size Typical Application
NiWC5 60 95%Ni60+5%WC 150/300 150/700 Screw, barrel, plunger
NiWC10 62 90%Ni60+10%WC 150/300 150/700 Screw, barrel, plunger
NiWC15 62 85%N160+15%WC 150/300 150/700 Valves, plungers
NiWC20 63 80%Ni60+20%WC 150/300 150/700 Valves, wire drawing dies, plungers
NiWC25 63 75%Ni60+25%WC 150/300 150/700 Valves, wire drawing dies, plungers
NiWC30 64 70%Ni60+30%WC 150/300 150/700 Wire drawing wheels, fan blades, screw input devices, etc.
NiWC35 65 65%Ni60+35%WC 150/300 150/700 Screw, barrel, plunger
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
CO(Ni) Nickle-based mixed co(Ni) coated tungsten carbide powder
Grade Hardness-HRC Chemical Composition Particle Size Typical Application
Ni+25Co(Ni)WC ≥60 75%Ni60+25%CO(Ni)WC 150/400 Screw, barrel, plunger
Ni+35Co(N)WC ≥60 65%Ni60+35%Co(Ni)WC 150/400 Screw, barrel, plunger
Ni+40Co(Ni)WC ≥60 60%Ni60+40%Co(Ni)WC 150/400 Valves, plungers
Ni+50Co(Ni)WC ≥60 50%Ni60+50%Co(Ni)WC 150/400 Valves, wire drawing dies, plungers
Ni+60Co(Ni)WC ≥60 40%Ni60+60%Co(Ni)WC 150/400 Valves, wire drawing dies, plungers
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
 Nickel base super alloy
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Co Mn Ni W B Others
NiCrW 20.0 ≤5.00 Bal 12.0 325/800 Supersonic spraying primer
NiCr20 0.20 20.0 1.00 ≤0.50 0.50 Bal 150/325 Supersonic spraying primer
NiCr50 0.20 50.0 1.00 ≤0.50 0.50 Bal 150/325 Papermaking pumps, power plant water boilers, and corrosive gas media containing V, S, etc.
Ni600 0.15 16.0 0.50 ≤8.00 8.0-10.0 Bal 100/270 Seawater corrosion resistant parts, marine accessories, chemical industry
Ni625 15 0.10 23.0 0.50 ≤5.00 8.0-10.0 0.50 Bal 100/270 Seawater corrosion resistant parts, chemical industry, paper industry
Ni718 15 0.08 20.0 0.35 ≤17.0 3.00 0.35 Bal Nb:5.50 100/270 Seawater corrosion resistant parts, marine accessories, chemical industry parts
Hastelloy B 35 0.10 1.00 0.50 ≤6.00 30.0 1.00 Bal 0.50 100/270 Chemical equipment, flue gas desulfurization and denitrification, papermaking industry
Hastelloy X 40 0.10 22.0 1.00 ≤20.0 9.00 2.00 1.00 Bal 1.00 100/270 Chemical equipment, flue gas desulfurization and denitrification, papermaking industry
Hastelloy C4 45 0.10 16.0 0.50 ≤3.00 16.0 2.00 1.00 Bal 100/270 Chemical equipment, flue gas desulfurization and denitrification, papermaking industry
Hastelloy C22 40 0.10 21.0 0.50 ≤4.00 13.0 2.00 0.50 Bal 3.00 100/270 Chemical equipment, flue gas desulfurization and denitrification, papermaking industry
Hastelloy C276 48 0.10 15.0 0.50 ≤6.00 16.0 1.00 ≤1.00 Bal 4.00 100/270 Chemical equipment, flue gas desulfurization and denitrification, papermaking industry
Hastelloy C276A 0.01 15.5 0.03 16.0 2.50 1.00 Bal 4.00 100/270 Chemical equipment, flue gas desulfurization and denitrification, papermaking industry
Monel Alloy 0.03 0.50 2.00 ≤3.00 Bal Cu:30.0 100/270 Valve stems, pump shafts and impellers, conveyor scrapers, oil well drill collars
Ni-C 0.10 16.5 0.90 ≤5.50 17.0 2.00 0.90 Bal 4.50 100/270 Papermaking machinery
Ni-Superc 0.05 23.0 18.0 Bal 100/270 Papermaking machinery
Mn400 0.15 1.25 ≤1.50 3.50 Bal Ti:2.00 100/270 Chemical, petrochemical, and marine development equipment
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Iron base powder
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Mn B Ni W Co Others
Fe304 ≤0.03 18.0 1.00 Bal ≤2.00 10.0 100/270 Medical equipment, chemical industry, food industry, ship parts
Fe316L ≤0.03 17.0 ≤1.00 Bal 2.50 ≤2.00 12.0 Cu:0.20 100/270 Valve body, valve seat, valve stem, ship parts
Fe17-4PH 36-40 0.07 16.0 ≤1.00 Bal ≤1.00 4.00 Nb:0.30 100/270 Paper Industry
Fe410L 40-45 0.03 12.5 0.50 Bal ≤1.00 100/270 valve
Fe420 50-53 0.20 13.0 ≤1.00 Bal ≤1.00 ≤0.75 100/270 piston
Fe430 45-48 ≤0.12 18.0 ≤0.75 Bal ≤1.00 ≤0.60 100/270 piston
Fe431 48-52 0.20 16.0 ≤1.00 Bal ≤1.00 2.00 100/270 Paper Machine
Fe90 52-55 0.15 13.5 ≤1.30 Bal <1.00 <1.00 <0.50 ≤5.00 100/270 Repair of oil drill pipes and rollers
Fe90-2 60-64 0.30 14.0 ≤1.30 Bal <1.00 <1.00 <0.50 ≤5.00 100/270 Repair of oil drill pipes and rollers
F313 50-54 0.15 16.0 1.00 Bal ≤1.00 ≤5.00 100/270 piston
F314 32-35 0.15 18.0 1.00 Bal ≤2.00 10.0 ≤5.00 100/270 piston
Fe1 35-40 ≤0.15 22.0 4.50 Bal 3.00 13.0 ≤5.00 100/270 High temperature resistant rollers and valves
Fe2 38-44 0.15 22.0 4.50 Bal 2.00 10.0 ≤5.00 100/270 High temperature resistant rollers and valves
Fe3 56-60 0.80 18.0 4.00 Bal 7.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe4 55-60 3.20 33.0 2.00 Bal 2.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe5 62-67 4.50 38.0 1.50 Bal ≤0.50 1.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe5A 60-65 4.00 38.0 1.50 Bal ≤1.00 ≤0.50 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe5-07 54-58 1.00 16.0 3.00 Bal 7.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe5-14 60-64 3.00 30.0 2.00 Bal 3.00 ≤0.50 5.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe5-14A 60-65 3.50 32.0 3.00 Bal 2.50 4.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe5-CD 60-64 4.50 25.0 2.00 Bal 3.00 1.50 1.00 V:2.00 ≤5.00 100/270 Oil drilling rigs, agricultural machinery, gear
Fe6 58-60 0.80 7.50 2.00 Bal 32.0 ≤5.00 100/270 Metallurgical Rollers
DFe38A 38-42 1.75 28.0 1.50 Bal 4.50 16.0 100/270 Automobile valve
DFe38H 40-44 2.10 28.0 1.50 Bal 5.50 11.5 100/270 Automobile valve
Fe45 40-46 0.60 7.50 2.00 Bal 22.0 ≤5.00 100/270 Papermaking machinery, agricultural machinery
D507Mo 23-27 0.15 15.0 1.00 Bal 2.00 1.00 ≤5.00 100/270 Valve cladding
D547Mo 40-45 0.15 20.0 2.50 Bal 3.50 12.0 ≤5.00 100/270 Valve cladding
Duplex stainless steel 20-24 0.03 25.0 0.80 Bal 4.00 1.20 7.00 Cu:0.50 N:0.30 100/270 Fertilizer, papermaking, petroleum, chemical and other devices
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Cobalt base powder Co-Cr-W
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Mo Fe Mn W Ni Co B Others
Co01 48-54 2.40 30.0 1.00 ≤1.00 ≤3.00 ≤1.00 12.0 ≤3.00 Bal 100/270 Valve seats, bearings, knife edges, rotating seal rings, etc.
Co02 45-50 1.00 28.0 1.20 ≤1.00 ≤3.00 ≤1.00 5.00 ≤3.00 Bal 100/270 Valve seats, bearings, knife edges, rotating seal rings, etc.
Co03 48 54 2.30 30.0 1.00 ≤3.00 12.0 ≤3.00 Bal 100/270 Needle valve seat, guide roller, valve seat, etc.
Co06 38-44 1.20 30.0 1.00 ≤1.00 ≤3.00 ≤1.00 4.50 ≤3.00 Bal 100/270 Engine valves, high pressure valves, etc.
Co156 39-45 1.60 28.0 1.10 ≤1.00 4.00 ≤3.00 Bal 100/270 Auto Parts
Co06H 43-48 1.30 30.0 1.50 0.8 ≤3.00 1.00 5.50 ≤3.00 Bal 100/270 Engine valves, high pressure valves, etc.
Co12 42-48 1.40 29.0 1.40 ≤1.00 ≤3.00 ≤1.00 8.50 ≤3.00 Bal 100/270 High temperature and high pressure valves, sawtooth screw push rods, etc.
Co12B 45-49 1.30 30.0 1.00 5.00 ≤3.00 ≤1.00 5.50 10.5 Bal 100/270 Saw blade guide
Co12H 48-53 1.70 30.0 1.70 2.00 ≤2.00 ≤0.50 7.00 ≤3.00 Bal 100/270 High temperature and high pressure valves, saw teeth, screws
Co107 40-44 2.00 35.0 1.00 ≤2.00 1.00 5.00 24.0 Bal 100/270 Work Hardening
Co19 48-56 1.80 31.0 1.00 ≤3.00 1.00 11.0 ≤3.00 Bal 100/270 Cutter
CoF 37-44 1.60 26.0 1.10 ≤0.50 ≤3.00 ≤0.50 12.0 22.5 Bal 100/270 Engine valves
CoFH 38-44 1.40 28.0 1.20 0.80 ≤3.00 0.50 12.0 22.5 Bal 300/500 Engine valves
Co20 57-63 2.50 32.0 1.00 ≤1.00 ≤3.00 ≤1.00 18.0 ≤3.00 Bal -270 Bearing sleeves, wear plates, etc.
Co20PM 58-64 2.90 35.0 0.80 ≤2.00 ≤1.00 18.0 ≤3.00 Bal ≤0.40 100/270 Bearing sleeves, wear plates, etc.
Co07 30-36 0.40 26.0 0.90 ≤3.00 0.30 5.50 ≤3.00 Bal 100/270 Steam turbine blades, brass casting molds, extrusion molds
CoX-40 30-35 0.80 25.5 0.40 ≤1.00 ≤1.00 ≤0.50 7.50 10.5 Bal 100/270 Steam turbine hot gas erosion resistant parts
Co31 30-35 0.40 25.5 0.80 ≤0.50 ≤2.00 ≤0.50 7.50 10.5 Bal P:≤0.04 100/270 Steam turbine hot gas erosion resistant parts
Co694 47-53 1.00 28.0 1.00 ≤2.50 1.00 19.0 Bal 100/270 Steam turbine components
Co25 20Max ≤0.10 20.0 0.80 ≤0.80 ≤3.00 ≤1.30 15.0 10.0 Bal 100/270 Hot extrusion die
Co306 34-40 0.40 25.0 1.00 ≤4.00 1.00 2.50 6 Bal Nb:7.00 100/270 Hot shears, clamp heads, guide wheels for red hot steel strip
Co190 57-63 3.30 26.0 0.80 ≤1.00 ≤3.00 ≤1.00 14.0 ≤3.00 Bal 100/270 Oil drill bit
Co21 28 0.25 27.5 2.00 5.50 2.00 <1.00 0.15 2.50 Bal 100/270 Various fluid valves, valve seats, etc.
Co6113 43-48 1.80 27.0 4.00 6.00 Bal Nb:5.00 100/270 Corrosion and wear conditions
Co238 20-26 0.10 26.0 1.00 3.00 ≤20.0 1.00 Bal 100/270 Forging Die
Co400 48-54 ≤0.08 8.50 2.50 29.0 ≤2.00 ≤0.50 ≤1.00 Bal 100/270 Forging Die
Co400M1 51-57 ≤0.08 14.0 2.60 26.0 ≤0.50 ≤0.50 0.50 Bal 100/270 High temperature corrosion resistant, galvanized spool sleeves and bushings
Co400M2 46-52 0.08 17.0 1.20 22.0 ≤0.50 ≤0.50 0.50 Bal 100/270 High temperature corrosion resistance
Co401 46-52 ≤0.08 17.0 1.20 22.0 ≤0.50 ≤0.50 ≤0.50 Bal 300/500 High temperature corrosion resistant, galvanized spool sleeves and bushings
Co800 52-58 ≤0.08 17.5 3.50 29.0 ≤2.00 ≤0.50 ≤1.00 Bal 100/270 High temperature corrosion resistant, galvanized spool sleeves and bushings
Co701 50-56 2.50 31.0 0.50 13.0 ≤3.00 0.50 ≤3.00 Bal 100/270 High temperature and high pressure valves with high corrosion resistance requirements
Co702 45-50 1.80 29.0 0.50 9.00 ≤3.00 0.50 ≤3.00 Bal 100/270 High temperature and high pressure valves with high corrosion resistance requirements
Co706 38-43 1.20 29.0 0.50 5.00 ≤3.00 1.00 ≤3.00 Bal 100/270 High temperature and high pressure valves with high corrosion resistance requirements
Co706K 40-46 1.60 31.0 0.50 5.50 ≤2.00 1.00 2.00 Bal 100/270 High temperature and high pressure valves with high corrosion resistance requirements
Co712 45-50 1.80 29.0 0.50 9 ≤3.00 0.50 3.00 Bal 100/270 High temperature and high pressure valves with high corrosion resistance requirements
Co720 54-60 2.50 33.0 0.50 18.0 ≤3.00 0.80 3.00 Bal 300/500 High temperature and high pressure valves with high corrosion resistance requirements
Co721 18-24 ≤0.05 30.0 0.60 4.00 ≤8.00 0.70 ≤3.00 Bal 100/270  Steam turbine cavitation resistant parts
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Cobalt base Containing B B-Co-Cr-Mo-W
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Mo Fe Mn W Ni Co B Others
Co18C 60 0.20 18.0 3.50 5.00 ≤2.50 30.0 Bal ≤5.00 150/300 High temperature and high pressure valves
Co107 48-53 0.20 19.0 1.90 5.30 ≤0.90 Bal ≤5.00 150/300 High temperature and high pressure valves
Co157 51-57 0.10 22.0 1.50 0.50 ≤3.00 5.00 3.00 Bal ≤5.00 150/300 High temperature and high pressure valves
Co158 40-46 0.80 29.0 1.50 ≤1.00 ≤3.00 ≤1.00 5.50 ≤5.00 Bal ≤5.00 150/300 High temperature and high pressure valves
Co158V 45-50 1.00 30.0 1.20 ≤4.50 0.30 8.00 3.00 Bal ≤5.00 200/400 Motorcycle valve
CoWC35 57-63 2.40 12.0 2.60 ≤2.50 33.0 9.00 Bal ≤5.00 150/300 Motorcycle valve
CoSF6 40-46 0.60 18.0 2.30 ≤1.00 ≤3.00 ≤0.50 7.50 14.0 Bal ≤5.00 150/300 Galvanized spool sleeves and bushings
CoSF12 46-52 0.90 18.0 2.80 ≤3.00 ≤0.50 9.00 14.0 Bal ≤5.00 150/300 High temperature and high pressure valves and valve seats
CoSF1 52-58 1.20 19.0 2.80 ≤3.00 ≤0.50 12.0 12.0 Bal ≤5.00 150/300 High temperature and high pressure valves and valve seats
CoSF20 59-64 1.50 19.0 3.00 ≤4.00 ≤0.50 15.0 13.0 Bal ≤5.00 150/300 High temperature and high pressure valves and valve seats
CoSFT400 55-60 0.10 10.0 2.50 22.0 ≤1.00 ≤0.50 5.00 Bal ≤5.00 100/270 Galvanized spool sleeves and bushings
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Copper base powder
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Mn B Ni Sn P Al Cu Others
TCu1 2.00 5.00 7-10 0.50 Bal 1027/35 Laser Cladding
TCu2 2.00 1.20 1.80 18.0 Bal 1027/35 Laser Cladding
TCu3 1.00 6.00 7-10 0.50 Bal 1027/35 Laser Cladding
TCu4 2.00 10.0 Bal 1027/35 Laser Cladding
Aluminum Bronze <0.03 <0.50 <0.50 9.50 Bal 1027/35 Laser Cladding
Aluminum Nickel Bronze <0.03 <0.50 <0.50 5.00 9.50 Bal 1027/35 Laser Cladding
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
 Laser cladding alloy powder 铁基系列 lron base
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Mn B Ni Co W Others
JG-1 20 ≤1.00 18.0 0.80 Bal 12.0 ≤5.00 100/270 Valve or casting primer
JG-2 30 0.07 17.5 0.80 Bal 7.00 ≤5.00 100/270 Axis repair
JG-3 40 0.10 18.0 0.80 Bal 4.50 ≤5.00 100/270 Hydraulic support column
JG-4 46 0.07 17.5 1.00 Bal 2.00 0.50 5.50 ≤5.00 100/270 Roller and shaft repair
JG-5 49 0.10 17.5 1.00 Bal 2.50 0.50 5.00 ≤5.00 100/270 Hydraulic support column
JG-7 45 0.05 14.0 1.00 Bal 1.50 4.00 ≤5.00 100/270 Roller repair
JG-8 52 0.15 18.5 0.80 Bal 2.50 ≤5.00 100/270 Hydraulic support column
JG-9 55 0.20 17.5 1.50 Bal 2.00 ≤5.00 100/270 Axis repair
JG-11 55 0.20 18.5 0.80 Bal 2.50 ≤5.00 100/270 Hydraulic support column
JG-12 58 0.25 18.5 1.00 Bal 2.00 2.00 ≤5.00 100/270 Roller repair
JG-13 60 0.36 18.0 1.07 Bal 0.45 ≤5.00 100/270 Roller and shaft repair
JG-18 32 0.20 18.0 1.00 Bal 12.0 ≤5.00 100/270 Inner hole cladding
JG-304 0.07 18.0 1.00 Bal ≤2.00 10.0 100/270 Medical equipment, chemical industry, food industry, ship parts
JG-316L 0.03 18.0 0.50 Bal 2.50 ≤2.00 12.0 Cu:0.20 100/270 Food industry, shipping
JG-410L 43-47 0.03 13.0 0.50 Bal ≤1.00 100/270 valve
Fe90 52-55 0.15 13.0 1.00 Bal <1.00 ≤1.00 ≤0.50 ≤5.00 100/270 Repair of oil drill pipes and rollers
Fe90-2 60-64 0.30 14.0 1.30 Bal <1.00 ≤1.00 ≤0.50 ≤5.00 100/270 Repair of oil drill pipes and rollers
F313 50-54 0.15 16.0 ≤1.00 Bal ≤1.00 ≤5.00 100/270 piston
F314 32-35 0.15 18.0 ≤1.00 Bal ≤0.50 10.0 ≤5.00 100/270 piston
D507Mo 23-27 0.15 15.0 1.00 Bal 2.00 1.00 ≤5.00 100/270 Valve cladding
D547Mo 40-45 0.15 20.0 4.00 Bal 3.50 12.0 ≤5.00 100/270 Valve cladding
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Laser cladding alloy powder  Cobalt base
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Mn B Ni Co W Others
JG-Co21LA 35 0.30 26.0 0.50 ≤1.00 6.00 1.00 ≤1.00 Ba1 100/270 Laser cladding
JG-Co22C 40 0.50 25.0 0.50 ≤1.00 12.0 1.00 3.50 Ba1 100/270 Laser cladding
JG-Co25 35 0.25 27.0 1.00 ≤1.50 5.50 0.50 2.80 Ba1 100/270 Laser cladding
JG-CoX-40 35 0.85 24.1 0.30 ≤1.50 0.40 0.50 10.0 Ba1 7.50 ≤5.00 100/270 Laser cladding
JG-Co06 40 1.10 28.5 1.00 ≤1.50 0.50 1.50 Ba1 4.40 ≤5.00 100/270 Laser cladding
JG-Co06H 45 1.30 28.5 1.00 ≤1.50 0.50 1.50 Ba1 4.40 ≤5.00 100/270 Laser cladding
JG-CoFH 40 1.70 26.0 1.20 ≤1.20 0.50 22.0 Ba1 12.5 100/270 Laser cladding
JG-Co12 48 1.40 28.5 1.10 ≤1.00 0.50 1.50 Ba1 8 100/270 Laser cladding
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
Laser cladding alloy powder  Nickel base
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Mn B Ni Co W Others
Ni15AA 15 0.05 2.00 ≤0.50 6.00 0.50 Bal ≤5.00 100/270 150/300 Laser cladding
Ni20M 25 0.05 3.50 2.30 ≤1.00 12.00 0.50 Bal ≤5.00 100/270 150/300 Laser cladding
Ni22AA 22 0.05 2.50 ≤1.00 5.50 0.50 Bal ≤5.00 100/270 150/300 Laser cladding
Ni30AA 30 0.15 5.00 3.00 ≤2.00 0.40 Bal ≤5.00 100/270 150/300 Laser cladding
NJ30-5 29 0.03 1.00 2.50 ≤2.50 0.30 Bal ≤5.00 100/270 150/300 Laser cladding
NJ30-5A 26 0.03 0.50 2.50 ≤2.70 0.30 Bal ≤5.00 100/270 150/300 Laser cladding
NI40AA 40 0.25 7.50 3.50 ≤2.50 Bal ≤5.00 100/270 150/300 Laser cladding
NI45AA 45 0.30 9.00 3.60 ≤5.00 Bal ≤5.00 100/270 150/300 Laser cladding
Ni50AA 50 0.45 11.0 3.90 ≤2.90 Bal ≤5.00 100/270 150/300 Laser cladding
Ni6OAA 60 0.75 16.0 4.30 ≤5.00 Bal ≤5.00 100/270 150/300 Laser cladding
Ni65WC 65 2.50 1.20 ≤0.50 Bal ≤5.00 100/270 150/300 Laser cladding
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
 Laser cladding alloy powder  Super alloy and copper
Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Fe Mo Mn B Ni Co W Others
NJ600 35 0.15 16.0 0.50 ≤8.00 8.0-10.0 Bal 100/270 Laser cladding
NJ625 40 0.10 23.0 0.50 ≤5.00 8.0-10.0 0.50 Bal 100/270 Laser cladding
NJ718 0.08 20.0 0.80 ≤17.0 3.00 0.35 Bal 100/270 Laser cladding
Hastelloy B 35 0.10 1.00 0.50 ≤6.00 30.0 Bal 1.00 0.50 100/270 Laser cladding
Hastelloy X 40 0.10 22.0 1.00 ≤20.0 9.00 1.00 Bal 2.00 1.00 100/270 Laser cladding
Hastelloy C4 45 0.10 16.0 0.50 ≤3.00 16.0 1.00 Bal 2.00 100/270 Laser cladding
Hastelloy C22 40 0.10 21.0 0.50 ≤4.00 13.0 0.50 Bal 2.00 3.00 100/270 Laser cladding
Hastelloy C276 48 0.10 15.0 0.50 ≤6.00 16.0 ≤1.00 Bal 1.00 4.00 100/270 Laser cladding
Monel Alloy 0.03 0.50 ≤2.00 ≤3.00 8.0-10.0 Bal Cu:30.0 100/270 Laser cladding
Aluminum Bronze <0.03 <0.50 <0.50 Cu:Bal Al:9.50 1027/35 Laser cladding
Aluminum Nickel Bronze <0.03 <0.50 <0.50 5.00 Cu:Bal Al:9.50 1027/35 Laser cladding
Note: Particle size: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Particle size can be adjusted according to customer needs.
 Centrifugal Casting Alloy Powder
Series Grade Hardness/HRC Chemical Composition Particle Size Typical Application
C Cr Si Mo Fe Mn W Ni Co Cu Others
Iron-based FJ101 62 3.30 2.00 1.00 Bal 1.00 5.00 ≤5.00 20/300 Centrifugal casting of barrel inner wall
FJ102 62 2.70 2.80 1.00 Bal 1.00 5.50 ≤5.00 20/300 Centrifugal casting of barrel inner wall
FJ103 62 1.50 4.50 1.00 Bal 1.00 7.00 ≤5.00 20/300 Centrifugal casting of barrel inner wall
FJ104 60 1.70 4.50 1.50 Bal 1.00 11.0 ≤5.00 20/300 Centrifugal casting of barrel inner wall
FJ105 62 1.50 5.50 1.30 1.50 Bal 0.80 4.50 12.0 ≤5.00 20/300 Centrifugal casting of barrel inner wall
FJ106 58 2.50 10.0 2.00 Bal 5.00 10.0 ≤5.00 20/300 Centrifugal casting of barrel inner wall
Nickel-based NJ580 58 7.00 4.50 ≤1.00 1.00 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ581 60 16.0 5.00 ≤1.00 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ582 55 0.30 7.00 3.00 ≤5.00 Bal 9.50 ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ583 45 0.50 8.00 1.50 ≤10.0 0.80 Bal 35.0 1.50 ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ584 62 0.50 8.00 3.20 2.50 0.80 Bal 8.50 ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ585 58 1.00 10.0 4.00 3.00 ≤6.00 4.00 Bal 10.0 ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ586 63 8.50 5.00 2.50 ≤2.00 Bal 11.0 ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ587 62 1.00 19.0 4.00 6.00 ≤4.00 6.00 Bal 10.0 ≤5.00 40/300 Centrifugal casting of barrel inner wall
NJ588 56 0.50 8.00 3.50 ≤4.00 1.00 Bal 10.0 ≤5.00 40/300 Centrifugal casting of barrel inner wall
Ni+WC NiWC301 62 1.00 5.50 3.20 ≤1.00 0.50 24.0 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
NiWC302 63 2.30 7.50 2.00 ≤38.0 10.0 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
NiWC303 61 0.80 9.00 3.80 6.50 0.50 15.0 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
NiWC304 60 0.40 6.00 3.60 ≤1.00 20.0 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
NiWC305 63 1.40 5.00 3.00 ≤1.00 33.0 Bal ≤5.00 40/300 Centrifugal casting of barrel inner wall
Cobalt-based CJ55 21.0 2.00 5.00 Bal 1.00 ≤5.00 20/300 Centrifugal casting of barrel inner wall
CJ61 22.0 2.50 5.50 Bal ≤5.00 20/300 Centrifugal casting of barrel inner wall
Note: The particle size can be adjusted according to customer needs.
 Soft magnetic powder
 Chemical Composition(wt%)
Products Fe Si Cr Ni C B O
FeSiCr-A(水/H2O) Bal 3.0-4.0 4.0-5.0 ≤0.03 ≤0.28
FeSiCr-B(水/H2O) Bal 4.5-5.5 5.0-6.0 ≤0.20 ≤0.03 ≤0.30
FeSiCr-C(水/H2O) Bal 7.5-8.5 3.5-4.5 ≤0.20 ≤0.03 ≤0.30
ZAP-01(amorphous) Bal 5.0-6.0 <0.05 2.5-3.5 ≤0.25
ZAP-02(amorphous) Bal 6.0-7.0 2.0-3.0 0.5-1.0 2.0-3.0 ≤0.25
FeSi3.5(H2O) Bal 3.0-4.0 ≤0.03 <0.55
FeSi6.5(H2O) Bal 5.5-7.0 ≤0.03 <0.36
FeSi6.5(GAS) Bal 6.0-7.0 ≤0.10 <0.06
FeSiNi(GAS) Bal 6.0-7.0 ≤0.10 1.0-3.0 <0.06
FeSiCr(GAS) Bal 5.0-7.0 1.0-3.0 <0.06
FeNi50(GAS) Bal <0.10 48-52 <0.09
FeNiMo(GAS) Bal Mo:1.5-3.0 80-83 <0.09
 Physical Propertie
Products  Laser particle size/μm A.D.g/cm3 T.D.g/cm3
D10 D50 D90
FeSiCr-A(H2O) 3.0-5.0 9.0-12.0 ≤28.0 ≥3.80
FeSiCr-B(H2O) 3.0-4.0 9.0-11.0 22.5-26.5 ≥3.50
FeSiCr-C(H2O) 3.35-4.15 9.0-11.0 22.5-27.5 ≥3.50
ZAP-01(amorphous) 3.0-4.0 7.5-10.5 18.5-26.0 ≥3.50
ZAP-02(amorphous) 3.0-5.0 9.0-11.0 22.0-27.0 ≥3.60
FeSi3.5(H2O) 3.0-5.0 9.0-11.0 22.0-27.0 ≥3.60
FeSi6.5(H2O) 20.0±2.0 ≥3.10 ≥4.30
FeSi6.5(GAS) 55.0-75.0 ≥4.20
FeSiNi(GAS) 50.0-70.0 ≥4.20
FeSiCr(GAS) 35.0-50.0 ≥4.20
FeNi50(GAS) 45.0-60.0 ≥4.80
FeNiMo(GAS) 65.0-80.0 ≥4.80
Reference Features of Inductance
Products Permeability KV
Voltage resitstance		 Antirust property (H20%)/0e
Bs
FeSiCr-A(H2O) 35 0.8 Good 130
FeSiCr-B(H2O) 33 0.9 Good 125
FeSiCr-C(H2O) 32 1.0 Best 120
ZAP-01(amorphous) 30 0.9 Better 130
ZAP-02(amorphous) 30 1.0 Better 150
 TypicalPowder Core Properties
Products Bs/Gs① μ DC Bias Core Loss
mW/cm3②
FeSi3.5(H2O) 18000 26-90 73% 1200
FeSi6.5(H2O) 17000 26-90 68% 1000
FeSi6.5(GAS) 18000 26-90 82% 600
FeSiNi(GAS) 15000 60-130 82% 600
FeSiCr(GAS) 12000 26-60 70% 650
FeNi50(GAS) 16000 60-180 85% 350
FeNiMo(GAS) 8000 60-300 85% 200
Testing Conditions:①100Oe，60u;②50KHz，0.1T
 MIM powder
Chemical Composition(wt%)
Products Fe C Cr Ni Mo Si Mn Cu Nb Co O
316L Bal ≤0.03 16-18 10.0-14.0 2-3 ≤1.00 ≤2.00 ≤0.35
304L Bal ≤0.03 18-20 8.0-11.0 ≤1.00 ≤2.00 ≤0.35
15-5PH Bal ≤0.07 14-15.5 3.5-5.0 ≤1.00 ≤1.00 2.5-4.5 0.25-0.45 ≤0.35
17-4PH Bal ≤0.07 15-17.5 3-5 ≤1.00 ≤1.00 3-5 0.25-0.45 ≤0.35
HK30 Bal 0.25-0.60 24-28 19-22 ≤0.50 ≤1.50 ≤1.50 1.30 ≤0.50
F75 28-32 6-8 ≤0.50 ≤0.50 Bal ≤0.35
KOVAR(4J29) Bal ≤0.03 <0.20 28-30 <0.2 ≤0.30 ≤0.50 <0.15 16-18 ≤0.35
440C Bal 1.0-1.2 16-18 ≤0.50 0.65 0.7-0.9 ≤1.00 ≤0.20
430 Bal ≤0.10 16-18 ≤1.00 ≤1.00 ≤0.32
410 Bal ≤0.15 12-14 ≤1.00 ≤1.00 ≤0.32
Fe-2Ni Bal 0.4-0.6 1.8-2.2 ≤1.00 ≤1.00 ≤0.50
Fe-8Ni Bal 0.4-0.6 7.8-8.2 ≤1.00 ≤1.00 ≤0.50
4605 Bal 0.4-0.6 1.5-2.5 0.2-0.5 ≤1.00 ≤0.50 ≤0.35
8620 Yes Yes Yes Yes Yes Yes Other:Yes
M2 Bal 0.78-1.05 3.75-4.50 4.5-5.5 0.2-0.4 ≤0.40 W:5.50-6.50 ≤0.30
H13 Bal 0.40 5.10 <0.30 1.3 1.00 0.35 ≤0.30
Physical Propertie
Products granularity(μm) T.D.g/cm3 S.D.g/cm3
D10 D50 D90
316L 2-3 8-11 19-22 4.85 7.85
304L 2-3 8-11 19-22 4.8 7.80
15-5PH 2-3 8-11 19-22 4.70 7.75
17-4PH 2-3 8-11 19-22 4.70 7.75
HK30 2-3 8-11 19-22 4.80 7.90
F75 2-3 8-11 19-22 5.10 8.10
KOVAR(4J29) 2-3 8-11 19-22 5.00 7.90
440C 2-3 8-11 19-22 4.60 7.65
430 2-3 8-11 19-22 4.60 7.60
410 2-3 8-11 19-22 4.50 7.60
Fe-2Ni 2-3 8-11 19-22 4.60 7.60
Fe-8Ni 2-3 8-11 19-22 4.65 7.65
4605 2-3 8-11 19-22 4.50 7.60
8620 2-3 8-11 19-22 4.65 7.60
M2 2-3 8-11 19-22 4.80 7.85
H13 2-3 8-11 19-22 4.65 7.60
PM Powder
Chemical Composition(wt%)
Products Fe C Cr Ni Mo Si Mn Cu Nb Co O
15-5PH Bal ≤0.07 14.-15.5 3.5-5 ≤1.00 ≤1.00 2.5-4.5 0.25-0.45 ≤0.35
17-4PH Bal ≤0.07 15-17.5 3-5 ≤1.00 ≤1.00 3-5 0.25-0.45 ≤0.35
HK30 Bal 0.25-0.60 24-28 19-22 ≤0.50 ≤1.50 ≤1.50 1.30 ≤0.50
F75 28-32 6-8 ≤0.5 ≤0.5 Bal ≤0.15
KOVAR(4J29) Bal ≤0.03 <0.20 28-30 <0.20 ≤0.3 ≤0.5 <0.15 16-18 ≤0.30
440C Bal 1.0-1.2 16-18 ≤0.5 0.65 0.7-0.9 ≤1.00 ≤0.20
430 Bal ≤0.10 16-18 ≤1.00 ≤1.00 ≤0.32
410 Bal ≤0.15 12-14 ≤1.00 ≤2.00 ≤0.32
Fe-2Ni Bal 0.4-0.6 1.8-2.2 ≤1.00 ≤1.00 ≤0.50
Fe-8Ni Bal 0.4-0.6 7.8-8.2 ≤1.00 ≤1.00 ≤0.50
4605 Bal 0.4-0.6 1.5-2.5 0.2-0.5 ≤1.00 ≤0.50 ≤0.35
8620 Yes Yes Yes Yes Yes Yes /Other:Yes
M2 Bal 0.78-1.05 3.75-4.5 4.5-5.5 0.2-0.4 ≤0.40 W:5.5-6.5 V:1.75-2.20 ≤0.08
M3-2 Bal 1.0-1.3 3.75-4.5 4.75-6.5 0.2-0.4 ≤0.40 W:5-6.75 V:2.75-3.25 ≤0.08
T15 Bal 1.55 4.00 <0.30 ≤1.00 0.2-0.4 ≤0.40 W:12 V:5.00 5.00 ≤0.08
H13 Bal 0.40 5.10 <0.30 1.30 1.00 0.35 V:1.00 ≤0.08
T400 <0.5 <0.15 7-9.5 <0.50 27-30 2-3.5 ≤0.40 Bal ≤0.10
FeCrAl Bal <0.08 5-6 ≤0.6 ≤0.40 A1:15-17 ≤0.30
 Physical Propertie
Products Mesh Size A.D.g/cm3 T.D.g/cm3 Flowability;s/50g
316L -100/+160 -500 2.0-2.5 5.0-5.5 <40
304L -100/+160 -500 2.0-2.5 4.9-5.5 <40
15-5PH -100 2.0-2.5 4.9-5.5 <40
17-4PH -100 2.0-2.5 4.9-5.5 <40
HK30 -100 2.0-2.5 4.9-5.5 <40
F75 -200 3.5-4.2 5.0-5.5 <30
KOVAR(4J29) -100 2.0-2.5 5.0-5.5 <40
440C -100 2.0-2.5 4.8-5.5 <40
430 -100 2.0-2.5 4.8-5.5 <40
410 -100 2.0-2.5 4.8-5.5 <40
Fe-2Ni -100 2.0-2.5 4.7-5.3 <40
Fe-8Ni -100 2.0-2.5 4.7-5.3 <40
4605 -100 2.0-2.5 4.7-5.3 <40
8620 -100 2.0-2.5 4.7-5.3 <40
M2 -100 2.0-2.5 5.0-5.5 <40
M3-2 -100 2.0-2.5 5.0-5.5 <40
T15 -100 2.3-2.6 5.0-5.5 <40
H13 -100 2.2-2.5 5.0-5.5 <40
T400 -100 3.5-4.2 5.2-5.6 <30
FeCrAl -50/+200 1.3-1.7 3.0-4.0 <80