Tin-based Babbitt alloy is the most widely used tin-antimony-copper-ternary alloy. Its representative alloy brands include SnSb4Cu4, SnSb8Cu4, SnSb8C8 and SnSb11Cu6.

A hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and performs linear reciprocating motion (or swing motion). It is the most important component of engineering

The remanufacturing and repair of damaged parts is an important way to recover huge economic and time losses, improve resource utilization, and achieve sustainable development of the national economy. Select

The surface of the cross head is formed of Babbitt alloy, which is formed by casting and welding. The bonding strength is not high, and the structure is coarse and

The special equipment for pick cladding is designed and developed according to the pick-type pick cladding path and process requirements. It has an exquisite industrial design appearance. The motion mechanism

Name: Converter tilting reducer Material: Q345 (low alloy high-strength structural steel) Basic situation: Since the reducer has been used for as long as 10 years, the outer ring of the

The gear meshing surface is prone to wear during use, and the gears are prone to partial tooth breakage when subjected to impact loads. The laser cladding process can be

Wear of the contact surface of transmission components during use is a common failure form. Laser cladding repair is used to repair the heat-affected zone with small residual stress. The

Huirui has completed several on-site laser repair cases of rolling mill arches. At present, Huirui’s technology and use effect of laser cladding repair of rolling mill arches have been generally

Hydraulic columns have been corroded by acid and alkaline media for a long time and operate in harsh, heavy-load, vibration, impact, and other environments. Their surfaces are easily prone to

The crystallizer is the core of the continuous casting machine. It is a device that injects molten steel into it, and after cooling, the outer layer of the molten steel

The crane roller is an important load-bearing component in the crane. It is made of Q345b. It is usually subjected to large shear stress during work. After long-term use, the

General looper rollers are prone to wear, peeling, fatigue cracks, roll sticking, and other problems during the hot strip rolling production process, resulting in parts being scrapped or even production

The valve stem is not only a moving part and a force-bearing part during the valve opening and closing process but also a sealing part. At the same time, it

Although the transmission shaft (flat head sleeve) has good hardness, it has poor impact resistance, cannot be restored after deformation, and has poor fatigue resistance, so it is easy to

Laminar cooling rollers are used in rolling mills for the transportation and laminar cooling of finished strips. During the transportation process of hot-rolled strips, laminar cooling rollers must not only