Wac +86 151 8448 3461[emailka waa la ilaaliyay]

Noocyada budada birta miiska

Ogosto 5, 2023

budada daawaha ee nikelka ku salaysan

Budada daawaha ee Nickel-ku-salaysan waxay leedahay iska caabin aad u wanaagsan oo daxalka ah iyo iska caabbinta oksaydhka, waxayna leedahay iska caabin aad u wanaagsan oo ay u leedahay xidhashada cufan ee culayska yar iyo xidhashada koollada ee ka hooseeya 600°C.

budada daawaha ee birta ku salaysan

Budada Alloys-ku-salaysan ee birta ah ayaa inta badan loo adeegsadaa qaybaha farsamada ee u adkaysta xidhashada iyo warbaahinta daxalka aashitada daciifka ah ee ka hooseeya 500°C.

Budada daawaha saldhigga Copper

Budada daawaha ee Copper-ku-salaysan waxay leedahay hab-kuleyl heer sare ah, korantada korantada oo xooggan, iska caabin adag oo daxalka ah, waana sahlan tahay in la farsameeyo.

Cobalt-ku salaysan budada daawaha

Budada daawaha ee Cobalt-ku-salaysan waxay wali sii wadi kartaa xoogga iyo adkaanta heerkul sare oo 900 ° C ah, sidoo kale waxay leedahay sifooyin dhammaystiran oo heer sare ah sida caabbinta xirashada heerkulka sare, oksaydhka heerkulka sare iyo daalka kulaylka.

budada daawaha la habeeyey

Marka loo eego baahiyaha kala duwan ee macaamiisha ee warshadaha kala duwan, waxaan u habeyn karnaa budada aluminiumka gaarka ah macaamiisha.

budada daawaha gaarka ah

Budada daawaha khaaska ah waxaa ka mid ah: budada daawaha ee dahaadhka leysarka, budada daawaynta dhexe ee centrifugal, budada daawaha durida, budada aluminium jilicsan ee jilicsan iyo budada daabacaadda 3D.

 

Noocyada qayb-hoosaadka budada:

budada buufinta sare ee nikkel-ku salaysan, budada alxanka buufinta ololka ku salaysan, budada cladding ee nikkel-ku salaysan, budada buufinta ololka ku salaysan budada, budada deddejinta balaasmaha ee birta, budada ololka birta ku salaysan, budada alxanka buufinta birta, budada alaxaha heerkulka sare ku salaysan, budada isku dhafan ee khaaska ah ee birta, budada cladding plasma cobalt budada buufinta supersonic, budada alxanka buufinta ololka ku salaysan, budada ololka cobalt-ku salaysan, budada aluminium heerkulka sare ku salaysan, budada khaaska ah ee kobalt-ku salaysan, budo naxaas ah oo naxaas ku salaysan, budo aluminium naxaas ah, naxaas aluminium-ku-salaysan budada nickel bronze-ku-salaysan, budada laysarka-ku-salaysan ee kobalt-ku-salaysan, budada laysay-ku-salaysan ee nikkel-ku-salaysan, budada laysarka-ku-salaysan ee birta, budada centrifugal-ku-salaysan, budada centrifugal-ku-salaysan nikkel, budada centrifugal-ku-salaysan birta, FeSi budada magnetic jilicsan, FeNiMo budada magnetic jilicsan, FeSiCr budada magnetic jilicsan, budada kobalt-ku salaysan ee gaarka ah, budada isku dhafan ee nikkel-ku salaysan, budada isku dhafan ee birta ku salaysan, Ni625 gaar ah, budo isku dhafan oo gaar ah, C276 gaar ah oo la habeeyay, cobalt- budada PM-ku-salaysan, budada PM-ku-salaysan ee nikkel, budada PM-ku-salaysan birta, budada MIM ee gaarka ah, budada MIM-ku-salaysan birta, budada MIM-ku-salaysan.

 Budada saldhigga nikel
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Co Mn B Ni Cu Qaar kale waxay
Ni15AA 15 0.03 0.46 2.30 ≤0.50 0.09 0.90 kubad 20.0 180/500 WC taxane buufin salka lakabka alxanka
Ni20M 20 0.03 4.50 2.00 0.70 kubad 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni20PTA 20 0.05 1.00 ≤0.15 0.90 kubad 80/230 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni22AA 22 0.20 0.10 2.85 ≤0.50 0.50 1.45 kubad 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni22APTA 28 ≤0.05 4.50 3.80 ≤3.00 0.30 1.00 kubad 100/270 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni22M1 26 0.03 0.50 3.00 ≤0.50 0.50 1.00 kubad ≤5.00 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni25 25 0.20 3.50 ≤8.00 1.50 kubad 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni28M 28 0.05 0.10 2.80 1.00 kubad 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni30AA 30 0.15 2.50 2.60 ≤1.00 0.30 1.40 kubad 180/500 Jiilalka, ilkaha gear
NJ30-HY 30 0.03 4.00 2.40 ≤0.50 1.00 kubad 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
NJ30-PTA 30 0.40 5.50 4.00 ≤1.50 1.00 kubad 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni31M 31 ≤0.05 4.00 2.40 ≤3.00 0.90 kubad ≤5.00 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni31M1 32 ≤0.05 3.50 3.20 ≤3.00 0.30 0.90 kubad ≤5.00 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni35AA 35 0.20 8.00 3.20 ≤3.00 0.10 0.10 1.60 kubad 150/300 Caaryada dhalada, kursiga valve
Ni35 35 0.30 10.50 3.50 ≤10.0 2.00 kubad 150/300 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni36M 36 ≤0.05 4.00 2.50 ≤3.00 ≤0.50 1.10 kubad ≤5.00 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni37M 35 0.15 4.50 2.80 ≤0.50 1.00 kubad ≤5.00 180/500 Dhalooyinka dhalada, feeraha, filimada bilowga ah ee kala duwan
Ni40AA 40 0.30 7.50 3.50 ≤2.30 0.10 0.10 1.70 kubad 150/300 Quudinta feedhaha, xudunta caaryada
Ni45A 45 0.05 8.00 3.50 ≤10.0 2.00 kubad 150/300 Quudinta feedhaha, xudunta caaryada
Ni45AACuMo 50 0.35 13.0 3.50 ≤5.00 2.50 2.50 kubad 2.50 150/300 Quudinta feedhaha, xudunta caaryada
Ni45PTA 46 0.05 7.50 3.80 ≤5.00 2.00 kubad 150/300 Feer, Valves, Plunger
Ni46M 46 0.05 6.54 2.80 ≤1.00 0.35 1.00 kubad ≤5.00 180/500 Caaryada dhalada ah, caaryada wax ka beddelidda ee kala duwan, iwm.
Ni50AA 50 0.45 11.0 4.00 ≤5.00 1.00 0.30 2.20 kubad 150/300 Feer, Valves, Plunger
Ni50CuMoW 51 0.30 11.0 4.00 ≤5.00 3.00 kubad 0.50 W: 1.50 300/500 Feer, Valves, Plunger
Ni55AA 56 0.50 15.0 4.00 ≤5.00 3.00 kubad 100/270 Qalabka wax lagu shiido, kamaradaha, tuubooyinka iyo tubooyinka qiiqa
Ni55AA 55 0.50 15.0 4.00 ≤8.00 3.00 kubad 150/300 Qalabka wax lagu shiido, kamaradaha, tuubooyinka iyo tubooyinka qiiqa
Ni55CuMo 53 0.40 15.0 4.30 ≤12.0 2.50 3.10 kubad 2.50 150/300 Qalabka wax lagu shiido, kamaradaha, tuubooyinka iyo tubooyinka qiiqa
Ni55AACuMo 50 0.60 15.0 4.00 ≤5.00 2.00 3.00 kubad 2.00 100/270 Qalabka wax lagu shiido, kamaradaha, tuubooyinka iyo tubooyinka qiiqa
Ni55AAPTA 58 0.80 15.0 4.00 ≤5.00 ≤0.20 3.00 kubad 100/270 Qalabka wax lagu shiido, kamaradaha, tuubooyinka iyo tubooyinka qiiqa
Ni56AA 56 0.60 13.5 3.80 ≤5.00 ≤0.50 2.60 kubad 100/270 Valves, caaryada, boolal
Ni56PAT 56 0.90 18.0 5.30 ≤5.50 1.90 kubad 100/270 Valves, caaryada, boolal
Ni58A 58 0.60 14.0 4.20 ≤10.0 1.70 3.40 kubad 1.80 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni58AMO 58 0.50 15.0 4.00 ≤10.0 2.00 3.50 kubad 1.50 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni60AA 60 0.78 15.9 4.55 ≤5.00 3.00 kubad 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni6OAAX 60 0.70 15.8 4.30 ≤8.00 ≤0.10 3.20 kubad 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni60A 60 0.70 15.0 4.00 ≤8.00 ≤0.10 3.20 kubad 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni60 60 0.80 16.0 4.00 ≤15.0 3.20 kubad 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni60PTA 60 1.10 19.0 5.50 ≤5.00 2.80 kubad 100/270 Plunger, valve, daab bamka, furka, iwm.
Ni60AAPTA-1 60 1.00 19.0 5.50 ≤8.00 2.80 kubad 100/270 Plunger, valve, daab bamka, furka, iwm.
Ni60AAPTA-2 60 1.00 19.0 5.50 ≤15.0 2.80 kubad 100/270 Plunger, valve, daab bamka, furka, iwm.
Ni60AAPTA-3 60 0.80 15.5 4.50 ≤15.0 ≤0.30 3.10 kubad 100/270 Plunger, valve, daab bamka, furka, iwm.
Ni60GM 60 1.00 14.0 3.50 ≤15.0 0.80 3.00 kubad 20/300 Plunger, valve, daab bamka, furka, iwm.
Ni60H 61 0.95 15.0 4.10 ≤15.0 3.10 kubad 150/300 Plunger, valve, daab bamka, furka, iwm.
Ni6OL 56 0.50 14.6 3.75 ≤15.0 0.50 ≤0.50 2.70 kubad 150/300 Laminar flow roller, iwm.
Ni6OM 63 0.80 16.5 4.30 ≤15.0 ≤0.30 3.00 kubad 150/300 Screw, iwm.
Ni6OW 62 0.80 16.0 3.90 ≤15.0 3.40 kubad W: 5.00 150/300 Screw, iwm.
Ni60S 60 0.80 15.5 3.80 ≤15.0 0.10 0.20 3.40 kubad 150/400 Screw, iwm.
ND500 52 1.20 20.5 2.90 ≤3.00 5.50 13.00 2.30 kubad 100/270 Waxaa loo isticmaalaa soo saarista iyo maroojinta dusha sare ee PTA
NF600 60 0.50 16.0 3.50 ≤5.00 3.00 kubad 150/300 Waxaa loo isticmaalaa soo saarista iyo maroojinta dusha sare ee PTA
NF600W 60 0.70 15.0 2.50 ≤5.00 3.00 kubad W: 4.30 150/300 Waxaa loo isticmaalaa soo saarista iyo maroojinta dusha sare ee PTA
NF601 60 0.70 15.5 3.20 ≤5.00 2.50 3.00 4.00 kubad 150/400 Waxaa loo isticmaalaa soo saarista iyo maroojinta dusha sare ee PTA
Ni60B 60 0.60 17.1 3.10 ≤25.0 0.46 4.00 kubad 150/300 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni60AACuMo 58 0.50 15.5 4.00 ≤3.00 2.50 3.50 kubad 2.50 150/300 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni60AACuMo1 60 0.70 15.0 4.00 ≤5.00 3.00 3.20 kubad 2.50 150/300 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni60AACuMo2 60 0.80 16.0 4.10 ≤5.00 1.00 3.20 kubad 1.50 150/300 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni60AACuMo3 57 0.60 16.5 4.00 ≤5.00 2.00 3.00 kubad 2.00 150/300 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni60ACuMo 60 0.80 15.5 4.00 ≤15.0 1.00 3.50 kubad 1.00 150/300 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni60W3 62 0.80 16.0 4.00 ≤15.0 3.30 kubad W: 3.50 150/300 柱塞、泵叶等
Burburiyaha, daabka bamka, iwm.
Ni60CuMoW 60 0.60 16.0 4.00 ≤4.00 2.00 4.00 kubad 2.00 W: 2.50 300/500 Plunger, daab bamka, valve kubbadda adag, iwm.
Ni220 31 1.10 kubad ≤2.00 100/270 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni220M 26 ≤0.05 4.50 3.20 ≤3.00 0.30 1.00 kubad ≤2.00 100/270 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
Ni330 37 0.10 5.00 3.50 ≤6.00 0.20 1.20 kubad 2.50 ≤5.00 100/270 Muraayadaha muraayadaha, filimada bilowga ah ee kala duwan
BNi11 0.02 25.6 4.70 ≤20.0 kubad ≤10.0 -300
BNi11M 0.03 10.0 5.00 ≤18.0 kubad ≤10.0 -300
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Nikel ku salaysan budada carbide tungsten isku qasan
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
Ni15WC ≥60 85%Ni60+15% WC 150/400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni20WC ≥60 80%Ni60+20% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni25WC ≥60 75%Ni60+25% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni30WC ≥60 70%Ni60+30% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni35WC ≥60 65%Ni60+35% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni40WC ≥60 60%Ni60+40% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni45WC ≥60 55%Ni60+45% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni50WC ≥60 50%Ni60+50% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni55WC ≥60 45%Ni60+55% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni60WC ≥60 40%Ni60+60% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Ni65WC ≥60 35%Ni60+65% WC 150 / 400 80 / 400 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
 budada carbide tungsten ee dahaarka ku salaysan ee nikelka
Fasalka Adag-HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
NiWC5 60 95%Ni60+5% WC 150 / 300 150 / 700 Dabool, foosto, tuunji
NiWC10 62 90%Ni60+10% WC 150 / 300 150 / 700 Dabool, foosto, tuunji
NiWC15 62 85% N160+15% WC 150 / 300 150 / 700 Valves, plungers
NiWC20 63 80%Ni60+20% WC 150 / 300 150 / 700 Valves, sawir-qaadista siligga ayaa dhinta, tuujiyayaasha
NiWC25 63 75%Ni60+25% WC 150 / 300 150 / 700 Valves, sawir-qaadista siligga ayaa dhinta, tuujiyayaasha
NiWC30 64 70%Ni60+30% WC 150 / 300 150 / 700 Taayirrada sawiridda fiilada, marawaxadaha, qalabka wax gelinta ee birta, iwm.
NiWC35 65 65%Ni60+35% WC 150 / 300 150 / 700 Dabool, foosto, tuunji
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
CO(Ni) budada carbide tungsten-ku-salaysan ee isku dhafka ah (Ni) ku salaysan
Fasalka Adag-HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
Ni+25Co(Ni)WC ≥60 75%Ni60+25%CO(Ni)WC 150/400 Dabool, foosto, tuunji
Ni+35Co(N)WC ≥60 65%Ni60+35%Co(Ni)WC 150/400 Dabool, foosto, tuunji
Ni+40Co(Ni)WC ≥60 60%Ni60+40%Co(Ni)WC 150/400 Valves, plungers
Ni+50Co(Ni)WC ≥60 50%Ni60+50%Co(Ni)WC 150/400 Valves, sawir-qaadista siligga ayaa dhinta, tuujiyayaasha
Ni+60Co(Ni)WC ≥60 40%Ni60+60%Co(Ni)WC 150/400 Valves, sawir-qaadista siligga ayaa dhinta, tuujiyayaasha
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
 Nickel base super alloy
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Co Mn Ni W B Qaar kale waxay
NiCrW 20.0 ≤5.00 kubad 12.0 325/800 Suxufiga buufinta sare
NiCr20 0.20 20.0 1.00 ≤0.50 0.50 kubad 150/325 Suxufiga buufinta sare
NiCr50 0.20 50.0 1.00 ≤0.50 0.50 kubad 150/325 Bambooyinka waraaqaha samaynta, kuleyliyaha biyaha warshada korantada, iyo warbaahinta gaaska daxalaysa ee ka kooban V, S, iwm.
Ni600 0.15 16.0 0.50 ≤8.00 8.0-10.0 kubad 100/270 Qaybaha u adkaysta daxalka biyaha badda, qalabka badda, warshadaha kiimikada
Ni625 15 0.10 23.0 0.50 ≤5.00 8.0-10.0 0.50 kubad 100/270 Qaybaha u adkaysta daxalka biyaha badda, warshadaha kiimikada, warshadaha waraaqaha
Ni718 15 0.08 20.0 0.35 ≤17.0 3.00 0.35 kubad Nb:5.50 100/270 Qaybaha u adkaysta daxalka biyaha badda, agabka badda, qaybaha warshadaha kiimikada
Hastelloy B 35 0.10 1.00 0.50 ≤6.00 30.0 1.00 kubad 0.50 100/270 Qalabka kiimikaad, nadiifinta gaasta flue iyo denitrification, warshadaha waraaqaha
Hastelloy X 40 0.10 22.0 1.00 ≤20.0 9.00 2.00 1.00 kubad 1.00 100/270 Qalabka kiimikaad, nadiifinta gaasta flue iyo denitrification, warshadaha waraaqaha
Hastelloy C4 45 0.10 16.0 0.50 ≤3.00 16.0 2.00 1.00 kubad 100/270 Qalabka kiimikaad, nadiifinta gaasta flue iyo denitrification, warshadaha waraaqaha
Hastelloy C22 40 0.10 21.0 0.50 ≤4.00 13.0 2.00 0.50 kubad 3.00 100/270 Qalabka kiimikaad, nadiifinta gaasta flue iyo denitrification, warshadaha waraaqaha
Hastelloy C276 48 0.10 15.0 0.50 ≤6.00 16.0 1.00 ≤1.00 kubad 4.00 100/270 Qalabka kiimikaad, nadiifinta gaasta flue iyo denitrification, warshadaha waraaqaha
Hastelloy C276A 0.01 15.5 0.03 16.0 2.50 1.00 kubad 4.00 100/270 Qalabka kiimikaad, nadiifinta gaasta flue iyo denitrification, warshadaha waraaqaha
Lacagta Alloy 0.03 0.50 2.00 ≤3.00 kubad Cu:30.0 100/270 Valve afkoda, ulaha bamka iyo impellers, wareejinta xoqida, collars ceelka saliidda
Ni-C 0.10 16.5 0.90 ≤5.50 17.0 2.00 0.90 kubad 4.50 100/270 Mashiinnada waraaqaha
Ni-Superc 0.05 23.0 18.0 kubad 100/270 Mashiinnada waraaqaha
Mn400 0.15 1.25 ≤1.50 3.50 kubad Ti: 2.00 100/270 Kiimikaad, kiimiko kiimikaad, iyo qalabka horumarinta badda
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Budada saldhiga birta
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Mn B Ni W Co Qaar kale waxay
Fe304 ≤0.03 18.0 1.00 kubad ≤2.00 10.0 100/270 Qalabka caafimaadka, warshadaha kiimikada, warshadaha cuntada, qaybaha markabka
Fe316L ≤0.03 17.0 ≤1.00 kubad 2.50 ≤2.00 12.0 Cu:0.20 100/270 Jidhka Valve, kursiga valve, jirida valve, qaybaha markabka
Fe17-4PH 36-40 0.07 16.0 ≤1.00 kubad ≤1.00 4.00 Nb:0.30 100/270 Warshadaha Warshadaha
Fe410L 40-45 0.03 12.5 0.50 kubad ≤1.00 100/270 waalka
Fe420 50-53 0.20 13.0 ≤1.00 kubad ≤1.00 ≤0.75 100/270 Piston
Fe430 45-48 ≤0.12 18.0 ≤0.75 kubad ≤1.00 ≤0.60 100/270 Piston
Fe431 48-52 0.20 16.0 ≤1.00 kubad ≤1.00 2.00 100/270 Mashiinka waraaqaha
Fe90 52-55 0.15 13.5 ≤1.30 kubad ≤5.00 100/270 Dayactirka tuubooyinka daloolista saliidda iyo rullallada
Fe90-2 60-64 0.30 14.0 ≤1.30 kubad ≤5.00 100/270 Dayactirka tuubooyinka daloolista saliidda iyo rullallada
F313 50-54 0.15 16.0 1.00 kubad ≤1.00 ≤5.00 100/270 Piston
F314 32-35 0.15 18.0 1.00 kubad ≤2.00 10.0 ≤5.00 100/270 Piston
Fe1 35-40 ≤0.15 22.0 4.50 kubad 3.00 13.0 ≤5.00 100/270 Rollers iyo valves u adkaysta heerkulka sare
Fe2 38-44 0.15 22.0 4.50 kubad 2.00 10.0 ≤5.00 100/270 Rollers iyo valves u adkaysta heerkulka sare
Fe3 56-60 0.80 18.0 4.00 kubad 7.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe4 55-60 3.20 33.0 2.00 kubad 2.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe5 62-67 4.50 38.0 1.50 kubad ≤0.50 1.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe5A 60-65 4.00 38.0 1.50 kubad ≤1.00 ≤0.50 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe5-07 54-58 1.00 16.0 3.00 kubad 7.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe5-14 60-64 3.00 30.0 2.00 kubad 3.00 ≤0.50 5.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe5-14A 60-65 3.50 32.0 3.00 kubad 2.50 4.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe5-CD 60-64 4.50 25.0 2.00 kubad 3.00 1.50 1.00 V: 2.00 ≤5.00 100/270 Qalabka qodista saliidda, mashiinada beeraha, qalabka
Fe6 58-60 0.80 7.50 2.00 kubad 32.0 ≤5.00 100/270 Rollers Birta
DFe38A 38-42 1.75 28.0 1.50 kubad 4.50 16.0 100/270 Waalka baabuurta
DFe38H 40-44 2.10 28.0 1.50 kubad 5.50 11.5 100/270 Waalka baabuurta
Fe45 40-46 0.60 7.50 2.00 kubad 22.0 ≤5.00 100/270 Mashiinnada waraaqaha, mashiinnada beeraha
D507Mo 23-27 0.15 15.0 1.00 kubad 2.00 1.00 ≤5.00 100/270 Xiritaanka Valve
D547Mo 40-45 0.15 20.0 2.50 kubad 3.50 12.0 ≤5.00 100/270 Xiritaanka Valve
Duplex ahama 20-24 0.03 25.0 0.80 kubad 4.00 1.20 7.00 Cu:0.50 N: 0.30 100/270 Bacriminta, waraaqaha samaynta, batroolka, kiimikooyinka iyo aaladaha kale
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Co-Cr-W budada saldhigga ah ee Cobalt
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Mo Fe Mn W Ni Co B Qaar kale waxay
Co01 48-54 2.40 30.0 1.00 ≤1.00 ≤3.00 ≤1.00 12.0 ≤3.00 kubad 100/270 Kuraasta Valve, biraha, geesaha mindida, wareegyada shaabadeynta, iwm.
Co02 45-50 1.00 28.0 1.20 ≤1.00 ≤3.00 ≤1.00 5.00 ≤3.00 kubad 100/270 Kuraasta Valve, biraha, geesaha mindida, wareegyada shaabadeynta, iwm.
Co03 48 54 2.30 30.0 1.00 ≤3.00 12.0 ≤3.00 kubad 100/270 Kursiga waalka irbadda, rullalulaatada hagaha, kursiga valve, iwm.
Co06 38-44 1.20 30.0 1.00 ≤1.00 ≤3.00 ≤1.00 4.50 ≤3.00 kubad 100/270 Mashiinnada matoorada, mashiinnada cadaadiska sare, iwm.
Co156 39-45 1.60 28.0 1.10 ≤1.00 4.00 ≤3.00 kubad 100/270 Qeybaha Awooda
Co06H 43-48 1.30 30.0 1.50 0.8 ≤3.00 1.00 5.50 ≤3.00 kubad 100/270 Mashiinnada matoorada, mashiinnada cadaadiska sare, iwm.
Co12 42-48 1.40 29.0 1.40 ≤1.00 ≤3.00 ≤1.00 8.50 ≤3.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sare, ulaha riixaya ee ilka dhogorta, iwm.
Co12B 45-49 1.30 30.0 1.00 5.00 ≤3.00 ≤1.00 5.50 10.5 kubad 100/270 Hagaha daab arka
Co12H 48-53 1.70 30.0 1.70 2.00 ≤2.00 ≤0.50 7.00 ≤3.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sare, ilko arka, boolal
Co107 40-44 2.00 35.0 1.00 ≤2.00 1.00 5.00 24.0 kubad 100/270 Adkaynta Shaqada
Co19 48-56 1.80 31.0 1.00 ≤3.00 1.00 11.0 ≤3.00 kubad 100/270 Mishiinka
CoF 37-44 1.60 26.0 1.10 ≤0.50 ≤3.00 ≤0.50 12.0 22.5 kubad 100/270 Gawaarida matoorka
COFH 38-44 1.40 28.0 1.20 0.80 ≤3.00 0.50 12.0 22.5 kubad 300/500 Gawaarida matoorka
Co20 57-63 2.50 32.0 1.00 ≤1.00 ≤3.00 ≤1.00 18.0 ≤3.00 kubad -270 Gacmo-gacmeedyo, xidho taarikada, iwm.
Co20PM 58-64 2.90 35.0 0.80 ≤2.00 ≤1.00 18.0 ≤3.00 kubad ≤0.40 100/270 Gacmo-gacmeedyo, xidho taarikada, iwm.
Co07 30-36 0.40 26.0 0.90 ≤3.00 0.30 5.50 ≤3.00 kubad 100/270 Garabka marawaxadaha uumiga, caaryada tuurista naxaasta ah, caaryada extrusion
CoX-40 30-35 0.80 25.5 0.40 ≤1.00 ≤1.00 ≤0.50 7.50 10.5 kubad 100/270 Uumiga marawaxadaha kulul gaaska u adkaysta nabaad guurka
Co31 30-35 0.40 25.5 0.80 ≤0.50 ≤2.00 ≤0.50 7.50 10.5 kubad P:≤0.04 100/270 Uumiga marawaxadaha kulul gaaska u adkaysta nabaad guurka
Co694 47-53 1.00 28.0 1.00 ≤2.50 1.00 19.0 kubad 100/270 Qaybaha marawaxadaha uumiga
Co25 20 Max ≤0.10 20.0 0.80 ≤0.80 ≤3.00 ≤1.30 15.0 10.0 kubad 100/270 Diidmo kulul ayaa dhinta
Co306 34-40 0.40 25.0 1.00 ≤4.00 1.00 2.50 6 kubad Nb:7.00 100/270 xiirid kulul, madaxa isku dhejinta, taayirrada haga ee fiilada birta kulul ee cas
Co190 57-63 3.30 26.0 0.80 ≤1.00 ≤3.00 ≤1.00 14.0 ≤3.00 kubad 100/270 Daloolinta saliidda
Co21 28 0.25 27.5 2.00 5.50 2.00 0.15 2.50 kubad 100/270 Qaybaha dareeraha ee kala duwan, kuraasta valve, iwm.
Co6113 43-48 1.80 27.0 4.00 6.00 kubad Nb:5.00 100/270 Xaaladaha daxalka iyo xidhashada
Co238 20-26 0.10 26.0 1.00 3.00 ≤20.0 1.00 kubad 100/270 Dhimasho been abuur ah
Co400 48-54 ≤0.08 8.50 2.50 29.0 ≤2.00 ≤0.50 ≤1.00 kubad 100/270 Dhimasho been abuur ah
Co400M1 51-57 ≤0.08 14.0 2.60 26.0 ≤0.50 ≤0.50 0.50 kubad 100/270 U adkaysiga daxalka heer-kulka sare, gacmo-gashiyo galvanized iyo bushings
Co400M2 46-52 0.08 17.0 1.20 22.0 ≤0.50 ≤0.50 0.50 kubad 100/270 Iska caabbinta daxalka heerkulka sare
Co401 46-52 ≤0.08 17.0 1.20 22.0 ≤0.50 ≤0.50 ≤0.50 kubad 300/500 U adkaysiga daxalka heer-kulka sare, gacmo-gashiyo galvanized iyo bushings
Co800 52-58 ≤0.08 17.5 3.50 29.0 ≤2.00 ≤0.50 ≤1.00 kubad 100/270 U adkaysiga daxalka heer-kulka sare, gacmo-gashiyo galvanized iyo bushings
Co701 50-56 2.50 31.0 0.50 13.0 ≤3.00 0.50 ≤3.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sarreeya ee leh shuruudaha iska caabinta daxalka sare
Co702 45-50 1.80 29.0 0.50 9.00 ≤3.00 0.50 ≤3.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sarreeya ee leh shuruudaha iska caabinta daxalka sare
Co706 38-43 1.20 29.0 0.50 5.00 ≤3.00 1.00 ≤3.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sarreeya ee leh shuruudaha iska caabinta daxalka sare
Co706K 40-46 1.60 31.0 0.50 5.50 ≤2.00 1.00 2.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sarreeya ee leh shuruudaha iska caabinta daxalka sare
Co712 45-50 1.80 29.0 0.50 9 ≤3.00 0.50 3.00 kubad 100/270 Heerkulka sare iyo tuubooyinka cadaadiska sarreeya ee leh shuruudaha iska caabinta daxalka sare
Co720 54-60 2.50 33.0 0.50 18.0 ≤3.00 0.80 3.00 kubad 300/500 Heerkulka sare iyo tuubooyinka cadaadiska sarreeya ee leh shuruudaha iska caabinta daxalka sare
Co721 18-24 ≤0.05 30.0 0.60 4.00 ≤8.00 0.70 ≤3.00 kubad 100/270  Uumiga marawaxadaha cavitation qaybo u adkaysta
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Saldhig Cobalt Ka kooban B B-Co-Cr-Mo-W
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Mo Fe Mn W Ni Co B Qaar kale waxay
Co18C 60 0.20 18.0 3.50 5.00 ≤2.50 30.0 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare
Co107 48-53 0.20 19.0 1.90 5.30 ≤0.90 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare
Co157 51-57 0.10 22.0 1.50 0.50 ≤3.00 5.00 3.00 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare
Co158 40-46 0.80 29.0 1.50 ≤1.00 ≤3.00 ≤1.00 5.50 ≤5.00 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare
Co158V 45-50 1.00 30.0 1.20 ≤4.50 0.30 8.00 3.00 kubad ≤5.00 200/400 valve mooto
CoWC35 57-63 2.40 12.0 2.60 ≤2.50 33.0 9.00 kubad ≤5.00 150/300 valve mooto
CoSF6 40-46 0.60 18.0 2.30 ≤1.00 ≤3.00 ≤0.50 7.50 14.0 kubad ≤5.00 150/300 Gacmo-gacmeedyo galvanized ah iyo kaymaha
CoSF12 46-52 0.90 18.0 2.80 ≤3.00 ≤0.50 9.00 14.0 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare iyo kuraasta valve
CoSF1 52-58 1.20 19.0 2.80 ≤3.00 ≤0.50 12.0 12.0 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare iyo kuraasta valve
CoSF20 59-64 1.50 19.0 3.00 ≤4.00 ≤0.50 15.0 13.0 kubad ≤5.00 150/300 Heerkulka sare iyo tuubooyinka cadaadiska sare iyo kuraasta valve
CoSFT400 55-60 0.10 10.0 2.50 22.0 ≤1.00 ≤0.50 5.00 kubad ≤5.00 100/270 Gacmo-gacmeedyo galvanized ah iyo kaymaha
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Budada saldhiga naxaasta ah
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Mn B Ni Sn P Al Cu Qaar kale waxay
Tcu1 2.00 5.00 7-10 0.50 kubad 1027/35 Daboolista Laser
Tcu2 2.00 1.20 1.80 18.0 kubad 1027/35 Daboolista Laser
Tcu3 1.00 6.00 7-10 0.50 kubad 1027/35 Daboolista Laser
Tcu4 2.00 10.0 kubad 1027/35 Daboolista Laser
Maarta Aluminium 9.50 kubad 1027/35 Daboolista Laser
Aluminium Nickel Bronze 5.00 9.50 kubad 1027/35 Daboolista Laser
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
 budada dahaadhka ah ee leysarka 铁基系列 saldhigga lron
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Mn B Ni Co W Qaar kale waxay
JG-1 20 ≤1.00 18.0 0.80 kubad 12.0 ≤5.00 100/270 Valve ama shukulaatada tuurista
JG-2 30 0.07 17.5 0.80 kubad 7.00 ≤5.00 100/270 Dayactirka dhidibka
JG-3 40 0.10 18.0 0.80 kubad 4.50 ≤5.00 100/270 Tiirka taageerada Haydarooliga
JG-4 46 0.07 17.5 1.00 kubad 2.00 0.50 5.50 ≤5.00 100/270 Dib u hagaajinta rullalusha iyo shafka
JG-5 49 0.10 17.5 1.00 kubad 2.50 0.50 5.00 ≤5.00 100/270 Tiirka taageerada Haydarooliga
JG-7 45 0.05 14.0 1.00 kubad 1.50 4.00 ≤5.00 100/270 Dayactirka rollerka
JG-8 52 0.15 18.5 0.80 kubad 2.50 ≤5.00 100/270 Tiirka taageerada Haydarooliga
JG-9 55 0.20 17.5 1.50 kubad 2.00 ≤5.00 100/270 Dayactirka dhidibka
JG-11 55 0.20 18.5 0.80 kubad 2.50 ≤5.00 100/270 Tiirka taageerada Haydarooliga
JG-12 58 0.25 18.5 1.00 kubad 2.00 2.00 ≤5.00 100/270 Dayactirka rollerka
JG-13 60 0.36 18.0 1.07 kubad 0.45 ≤5.00 100/270 Dib u hagaajinta rullalusha iyo shafka
JG-18 32 0.20 18.0 1.00 kubad 12.0 ≤5.00 100/270 dalool gudaha ah oo daboolaya
JG-304 0.07 18.0 1.00 kubad ≤2.00 10.0 100/270 Qalabka caafimaadka, warshadaha kiimikada, warshadaha cuntada, qaybaha markabka
JG-316L 0.03 18.0 0.50 kubad 2.50 ≤2.00 12.0 Cu:0.20 100/270 Warshadaha cuntada, dhoofinta
JG-410L 43-47 0.03 13.0 0.50 kubad ≤1.00 100/270 waalka
Fe90 52-55 0.15 13.0 1.00 kubad ≤1.00 ≤0.50 ≤5.00 100/270 Dayactirka tuubooyinka daloolista saliidda iyo rullallada
Fe90-2 60-64 0.30 14.0 1.30 kubad ≤1.00 ≤0.50 ≤5.00 100/270 Dayactirka tuubooyinka daloolista saliidda iyo rullallada
F313 50-54 0.15 16.0 ≤1.00 kubad ≤1.00 ≤5.00 100/270 Piston
F314 32-35 0.15 18.0 ≤1.00 kubad ≤0.50 10.0 ≤5.00 100/270 Piston
D507Mo 23-27 0.15 15.0 1.00 kubad 2.00 1.00 ≤5.00 100/270 Xiritaanka Valve
D547Mo 40-45 0.15 20.0 4.00 kubad 3.50 12.0 ≤5.00 100/270 Xiritaanka Valve
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Caleemaha dahaadhka ah ee budada ah ee Cobalt
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Mn B Ni Co W Qaar kale waxay
JG-Co21LA 35 0.30 26.0 0.50 ≤1.00 6.00 1.00 ≤1.00 Ba1 100/270 Daboolista leysarka
JG-Co22C 40 0.50 25.0 0.50 ≤1.00 12.0 1.00 3.50 Ba1 100/270 Daboolista leysarka
JG-Co25 35 0.25 27.0 1.00 ≤1.50 5.50 0.50 2.80 Ba1 100/270 Daboolista leysarka
JG-CoX-40 35 0.85 24.1 0.30 ≤1.50 0.40 0.50 10.0 Ba1 7.50 ≤5.00 100/270 Daboolista leysarka
JG-Co06 40 1.10 28.5 1.00 ≤1.50 0.50 1.50 Ba1 4.40 ≤5.00 100/270 Daboolista leysarka
JG-Co06H 45 1.30 28.5 1.00 ≤1.50 0.50 1.50 Ba1 4.40 ≤5.00 100/270 Daboolista leysarka
JG-CoFH 40 1.70 26.0 1.20 ≤1.20 0.50 22.0 Ba1 12.5 100/270 Daboolista leysarka
JG-Co12 48 1.40 28.5 1.10 ≤1.00 0.50 1.50 Ba1 8 100/270 Daboolista leysarka
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
Laser cladding budada daawaha ee Nikel saldhiga
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Mn B Ni Co W Qaar kale waxay
Ni15AA 15 0.05 2.00 ≤0.50 6.00 0.50 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Ni20M 25 0.05 3.50 2.30 ≤1.00 12.00 0.50 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Ni22AA 22 0.05 2.50 ≤1.00 5.50 0.50 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Ni30AA 30 0.15 5.00 3.00 ≤2.00 0.40 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
NJ30-5 29 0.03 1.00 2.50 ≤2.50 0.30 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
NJ30-5A 26 0.03 0.50 2.50 ≤2.70 0.30 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
NI40AA 40 0.25 7.50 3.50 ≤2.50 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
NI45AA 45 0.30 9.00 3.60 ≤5.00 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Ni50AA 50 0.45 11.0 3.90 ≤2.90 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Ni6OAA 60 0.75 16.0 4.30 ≤5.00 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Ni65WC 65 2.50 1.20 ≤0.50 kubad ≤5.00 100 / 270 150 / 300 Daboolista leysarka
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
 Laser cladding Alloy budada Super alloy iyo copper
Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Fe Mo Mn B Ni Co W Qaar kale waxay
NJ600 35 0.15 16.0 0.50 ≤8.00 8.0-10.0 kubad 100/270 Daboolista leysarka
NJ625 40 0.10 23.0 0.50 ≤5.00 8.0-10.0 0.50 kubad 100/270 Daboolista leysarka
NJ718 0.08 20.0 0.80 ≤17.0 3.00 0.35 kubad 100/270 Daboolista leysarka
Hastelloy B 35 0.10 1.00 0.50 ≤6.00 30.0 kubad 1.00 0.50 100/270 Daboolista leysarka
Hastelloy X 40 0.10 22.0 1.00 ≤20.0 9.00 1.00 kubad 2.00 1.00 100/270 Daboolista leysarka
Hastelloy C4 45 0.10 16.0 0.50 ≤3.00 16.0 1.00 kubad 2.00 100/270 Daboolista leysarka
Hastelloy C22 40 0.10 21.0 0.50 ≤4.00 13.0 0.50 kubad 2.00 3.00 100/270 Daboolista leysarka
Hastelloy C276 48 0.10 15.0 0.50 ≤6.00 16.0 ≤1.00 kubad 1.00 4.00 100/270 Daboolista leysarka
Lacagta Alloy 0.03 0.50 ≤2.00 ≤3.00 8.0-10.0 kubad Cu:30.0 100/270 Daboolista leysarka
Maarta Aluminium Cu: Bal Al:9.50 1027/35 Daboolista leysarka
Aluminium Nickel Bronze 5.00 Cu: Bal Al:9.50 1027/35 Daboolista leysarka
Fiiro gaar ah: Cabbirka walxaha: -100/+270 mesh (-150/+53μm); -150/+325 mesh (-106/+45μm); -270/+500 mesh (-53/+20μm; -325/+800 (-45/+15μm); Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
 Centrifugal shubista Alloy budada
Taxanaha Fasalka Adag/HRC Qaab dhismeedka Chemical Cabbirka Qaybta Codsiga Caadiga ah
C Cr Si Mo Fe Mn W Ni Co Cu Qaar kale waxay
Bir ku salaysan FJ101 62 3.30 2.00 1.00 kubad 1.00 5.00 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
FJ102 62 2.70 2.80 1.00 kubad 1.00 5.50 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
FJ103 62 1.50 4.50 1.00 kubad 1.00 7.00 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
FJ104 60 1.70 4.50 1.50 kubad 1.00 11.0 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
FJ105 62 1.50 5.50 1.30 1.50 kubad 0.80 4.50 12.0 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
FJ106 58 2.50 10.0 2.00 kubad 5.00 10.0 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
Nikel ku salaysan NJ580 58 7.00 4.50 ≤1.00 1.00 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ581 60 16.0 5.00 ≤1.00 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ582 55 0.30 7.00 3.00 ≤5.00 kubad 9.50 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ583 45 0.50 8.00 1.50 ≤10.0 0.80 kubad 35.0 1.50 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ584 62 0.50 8.00 3.20 2.50 0.80 kubad 8.50 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ585 58 1.00 10.0 4.00 3.00 ≤6.00 4.00 kubad 10.0 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ586 63 8.50 5.00 2.50 ≤2.00 kubad 11.0 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ587 62 1.00 19.0 4.00 6.00 ≤4.00 6.00 kubad 10.0 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NJ588 56 0.50 8.00 3.50 ≤4.00 1.00 kubad 10.0 ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
Ni+WC NiWC301 62 1.00 5.50 3.20 ≤1.00 0.50 24.0 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NiWC302 63 2.30 7.50 2.00 ≤38.0 10.0 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NiWC303 61 0.80 9.00 3.80 6.50 0.50 15.0 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NiWC304 60 0.40 6.00 3.60 ≤1.00 20.0 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
NiWC305 63 1.40 5.00 3.00 ≤1.00 33.0 kubad ≤5.00 40/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
Cobalt ku salaysan CJ55 21.0 2.00 5.00 kubad 1.00 ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
CJ61 22.0 2.50 5.50 kubad ≤5.00 20/300 Tuuritaanka centrifugal ee gidaarka gudaha ee foosto
Fiiro gaar ah: Cabbirka walxaha waxaa lagu hagaajin karaa iyadoo loo eegayo baahida macaamiisha.
 budada magnetic jilicsan
 Halabuurka Kiimikada (wt%)
Alaabta Fe Si Cr Ni C B O
FeSiCr-A (水/H2O) kubad 3.0-4.0 4.0-5.0 ≤0.03 ≤0.28
FeSiCr-B (水/H2O) kubad 4.5-5.5 5.0-6.0 ≤0.20 ≤0.03 ≤0.30
FeSiCr-C (水/H2O) kubad 7.5-8.5 3.5-4.5 ≤0.20 ≤0.03 ≤0.30
ZAP-01 (aan lahayn) kubad 5.0-6.0 2.5-3.5 ≤0.25
ZAP-02 (aan lahayn) kubad 6.0-7.0 2.0-3.0 0.5-1.0 2.0-3.0 ≤0.25
FeSi3.5 (H2O) kubad 3.0-4.0 ≤0.03
FeSi6.5 (H2O) kubad 5.5-7.0 ≤0.03
FeSi6.5 (GAS) kubad 6.0-7.0 ≤0.10
FeSiNi(GAS) kubad 6.0-7.0 ≤0.10 1.0-3.0
FeSiCr(GAS) kubad 5.0-7.0 1.0-3.0
FeNi50(GAS) kubad 48-52
FeNiMo(GAS) kubad Mo:1.5-3.0 80-83
 Hantida Jireed
Alaabta  Cabbirka walxaha leysarka/μm ADg/cm3 TDg/cm3
D10 D50 D90
FeSiCr-A(H2O) 3.0-5.0 9.0-12.0 ≤28.0 ≥3.80
FeSiCr-B(H2O) 3.0-4.0 9.0-11.0 22.5-26.5 ≥3.50
FeSiCr-C (H2O) 3.35-4.15 9.0-11.0 22.5-27.5 ≥3.50
ZAP-01 (aan lahayn) 3.0-4.0 7.5-10.5 18.5-26.0 ≥3.50
ZAP-02 (aan lahayn) 3.0-5.0 9.0-11.0 22.0-27.0 ≥3.60
FeSi3.5 (H2O) 3.0-5.0 9.0-11.0 22.0-27.0 ≥3.60
FeSi6.5 (H2O) 20.0 ± 2.0 ≥3.10 ≥4.30
FeSi6.5 (GAS) 55.0-75.0 ≥4.20
FeSiNi(GAS) 50.0-70.0 ≥4.20
FeSiCr(GAS) 35.0-50.0 ≥4.20
FeNi50(GAS) 45.0-60.0 ≥4.80
FeNiMo(GAS) 65.0-80.0 ≥4.80
Tixraaca Tilmaamaha Inductance
Alaabta Joogto KV
Iska caabbinta korantada		 Hantida ka hortagga (H20%)/0e
Bs
FeSiCr-A(H2O) 35 0.8 Good 130
FeSiCr-B(H2O) 33 0.9 Good 125
FeSiCr-C (H2O) 32 1.0 Best 120
ZAP-01 (aan lahayn) 30 0.9 Better 130
ZAP-02 (aan lahayn) 30 1.0 Better 150
 Guryaha Muhiimka ah ee Budada Caadiga ah
Alaabta Bs/Gs① μ Eexda DC Khasaaraha Muhiimka ah
mW/cm3②
FeSi3.5 (H2O) 18000 26-90 73% 1200
FeSi6.5 (H2O) 17000 26-90 68% 1000
FeSi6.5 (GAS) 18000 26-90 82% 600
FeSiNi(GAS) 15000 60-130 82% 600
FeSiCr(GAS) 12000 26-60 70% 650
FeNi50(GAS) 16000 60-180 85% 350
FeNiMo(GAS) 8000 60-300 85% 200
Xaaladaha Imtixaanka: ①100Oe, 60u;②50KHz,0.1T
 Budada MIM
Halabuurka Kiimikada (wt%)
Alaabta Fe C Cr Ni Mo Si Mn Cu Nb Co O
316L kubad ≤0.03 16-18 10.0-14.0 2-3 ≤1.00 ≤2.00 ≤0.35
304L kubad ≤0.03 18-20 8.0-11.0 ≤1.00 ≤2.00 ≤0.35
15-5PH kubad ≤0.07 14-15.5 3.5-5.0 ≤1.00 ≤1.00 2.5-4.5 0.25-0.45 ≤0.35
17-4PH kubad ≤0.07 15-17.5 3-5 ≤1.00 ≤1.00 3-5 0.25-0.45 ≤0.35
HK30 kubad 0.25-0.60 24-28 19-22 ≤0.50 ≤1.50 ≤1.50 1.30 ≤0.50
F75 28-32 6-8 ≤0.50 ≤0.50 kubad ≤0.35
KOVAR(4J29) kubad ≤0.03 28-30 ≤0.30 ≤0.50 16-18 ≤0.35
440C kubad 1.0-1.2 16-18 ≤0.50 0.65 0.7-0.9 ≤1.00 ≤0.20
430 kubad ≤0.10 16-18 ≤1.00 ≤1.00 ≤0.32
410 kubad ≤0.15 12-14 ≤1.00 ≤1.00 ≤0.32
Fe-2Ni kubad 0.4-0.6 1.8-2.2 ≤1.00 ≤1.00 ≤0.50
Fe-8Ni kubad 0.4-0.6 7.8-8.2 ≤1.00 ≤1.00 ≤0.50
4605 kubad 0.4-0.6 1.5-2.5 0.2-0.5 ≤1.00 ≤0.50 ≤0.35
8620 Haa Haa Haa Haa Haa Haa Mid kale: Haa
M2 kubad 0.78-1.05 3.75-4.50 4.5-5.5 0.2-0.4 ≤0.40 W:5.50-6.50 ≤0.30
H13 kubad 0.40 5.10 1.3 1.00 0.35 ≤0.30
Hantida Jireed
Alaabta granularity (μm) TDg/cm3 SDg/cm3
D10 D50 D90
316L 2-3 8-11 19-22 4.85 7.85
304L 2-3 8-11 19-22 4.8 7.80
15-5PH 2-3 8-11 19-22 4.70 7.75
17-4PH 2-3 8-11 19-22 4.70 7.75
HK30 2-3 8-11 19-22 4.80 7.90
F75 2-3 8-11 19-22 5.10 8.10
KOVAR(4J29) 2-3 8-11 19-22 5.00 7.90
440C 2-3 8-11 19-22 4.60 7.65
430 2-3 8-11 19-22 4.60 7.60
410 2-3 8-11 19-22 4.50 7.60
Fe-2Ni 2-3 8-11 19-22 4.60 7.60
Fe-8Ni 2-3 8-11 19-22 4.65 7.65
4605 2-3 8-11 19-22 4.50 7.60
8620 2-3 8-11 19-22 4.65 7.60
M2 2-3 8-11 19-22 4.80 7.85
H13 2-3 8-11 19-22 4.65 7.60
PM Powder
Halabuurka Kiimikada (wt%)
Alaabta Fe C Cr Ni Mo Si Mn Cu Nb Co O
15-5PH kubad ≤0.07 14.-15.5 3.5-5 ≤1.00 ≤1.00 2.5-4.5 0.25-0.45 ≤0.35
17-4PH kubad ≤0.07 15-17.5 3-5 ≤1.00 ≤1.00 3-5 0.25-0.45 ≤0.35
HK30 kubad 0.25-0.60 24-28 19-22 ≤0.50 ≤1.50 ≤1.50 1.30 ≤0.50
F75 28-32 6-8 ≤0.5 ≤0.5 kubad ≤0.15
KOVAR(4J29) kubad ≤0.03 28-30 ≤0.3 ≤0.5 16-18 ≤0.30
440C kubad 1.0-1.2 16-18 ≤0.5 0.65 0.7-0.9 ≤1.00 ≤0.20
430 kubad ≤0.10 16-18 ≤1.00 ≤1.00 ≤0.32
410 kubad ≤0.15 12-14 ≤1.00 ≤2.00 ≤0.32
Fe-2Ni kubad 0.4-0.6 1.8-2.2 ≤1.00 ≤1.00 ≤0.50
Fe-8Ni kubad 0.4-0.6 7.8-8.2 ≤1.00 ≤1.00 ≤0.50
4605 kubad 0.4-0.6 1.5-2.5 0.2-0.5 ≤1.00 ≤0.50 ≤0.35
8620 Haa Haa Haa Haa Haa Haa / Mid kale: Haa
M2 kubad 0.78-1.05 3.75-4.5 4.5-5.5 0.2-0.4 ≤0.40 W:5.5-6.5 V: 1.75-2.20 ≤0.08
M3-2 kubad 1.0-1.3 3.75-4.5 4.75-6.5 0.2-0.4 ≤0.40 W:5-6.75 V: 2.75-3.25 ≤0.08
T15 kubad 1.55 4.00 ≤1.00 0.2-0.4 ≤0.40 W: 12 V: 5.00 5.00 ≤0.08
H13 kubad 0.40 5.10 1.30 1.00 0.35 V: 1.00 ≤0.08
T400 7-9.5 27-30 2-3.5 ≤0.40 kubad ≤0.10
FeCrAl kubad 5-6 ≤0.6 ≤0.40 A1:15-17 ≤0.30
 Hantida Jireed
Alaabta Cabbirka Mesh ADg/cm3 TDg/cm3 Socodka;s/50g
316L -100/+160 -500 2.0-2.5 5.0-5.5
304L -100/+160 -500 2.0-2.5 4.9-5.5
15-5PH -100 2.0-2.5 4.9-5.5
17-4PH -100 2.0-2.5 4.9-5.5
HK30 -100 2.0-2.5 4.9-5.5
F75 -200 3.5-4.2 5.0-5.5
KOVAR(4J29) -100 2.0-2.5 5.0-5.5
440C -100 2.0-2.5 4.8-5.5
430 -100 2.0-2.5 4.8-5.5
410 -100 2.0-2.5 4.8-5.5
Fe-2Ni -100 2.0-2.5 4.7-5.3
Fe-8Ni -100 2.0-2.5 4.7-5.3
4605 -100 2.0-2.5 4.7-5.3
8620 -100 2.0-2.5 4.7-5.3
M2 -100 2.0-2.5 5.0-5.5
M3-2 -100 2.0-2.5 5.0-5.5
T15 -100 2.3-2.6 5.0-5.5
H13 -100 2.2-2.5 5.0-5.5
T400 -100 3.5-4.2 5.2-5.6
FeCrAl -50 / + 200 1.3-1.7 3.0-4.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Penny Xu

Penny Xu - Maareeyaha Guud, Mashaariicda Wax-soo-saarka Birta ee Wax-soo-saarka Birta Mr. Penny Xu waa maamulaha guud ee khibrada leh iyo khabiir istaraatiijiyadeed oo ku jira qaybta wax-soo-saarka birta, isagoo door muhiim ah ka ciyaaraya buundada u dhaxaysa tiknoolajiyada iyo ganacsiga. Iyada oo leh aragti gaar ah iyo awood is-dhexgalka kheyraadka, wuxuu kormeeraa geynta ganacsiga iyo fulinta istiraatiijiga ah ee mashaariicda AM ee birta ah. Mas'uuliyadda xudunta u ah Mr. Xu waa in ay si qoto dheer ula falgalaan isbeddellada suuqa-goynta iyo shuruudaha farsamada ee macaamiisha-dhamaadka sare. Waxa uu ku fiican yahay tilmaamaya caqabadaha asaasiga ah ee macaamiisha ee ku saabsan waxqabadka, kharashka, iyo wakhtiga hogaanka, oo u turjumaya baahiyahan qoraallo farsamo oo cad oo la fulin karo. Ku dhisan…

Akhri maqaalo badan oo ay qortay Penny Xu